Audiotrak MAYA 7.1 User Manual page 22

IF you are using Sonar, you should click 'Wave Profiler' again after changing the latency.
Changing the latency affects all applications.
C – F
ONFIG ACTORY
Returns all MAYA 7.1 Control Panel settings to the original shipping state.
C - A
ONFIG LWAYS
Keeps the MAYA 7.1 Control Panel on top of all open windows. This is useful when working with
multiple music applications simultaneously.
M
APPER
When you set the 'Stereo-PCM, SPDIF, AC3' driver in the Windows audio setting, you may
choose the output port for the stereo wave file in the Mapper menu. You may choose to send
the stereo wave file to Out 1,2, Out 3,4, Out 5,6 or Out 7,8. When you use the AC3, DTS
decoder through the Optical output, you should choose "Out 1,2(SPDIF/AC3)".
I M
NPUT IXER
This section of the Control Panel adjusts the Input levels of each device. The MIC input defaults
to a 20dB boost with Mute turned on.
If you are not using an input, you should select Mute under that input.
AUDIOTRAK MAYA 7.1 User's Guide
D
EFAULT
O T
N OP
- 20 -