Audiotrak MAYA 7.1 User Manual page 10

4. Choose an available PCI slot and remove the cover plate (and the screw that holds it in
place) from the slot on the back of the computer.
5. Before handling the MAYA 7.1 PCI card, make sure once again that you are properly
grounded then remove the card from its protective envelope.
6. Align the MAYA 7.1 PCI card with the selected PCI slot.
7. Press the card gently but firmly into the slot until the connector is fully inserted. Don't
force the card into the slot and never bend it in any way. If the card isn't snugly fit,
pull the card out and try it again.
8. Using the screw removed from Step 4, screw it back onto the card to keep it from
moving. It must be tightly and firmly screwed on.
9. After the card is installed, replace the computer's main cover.
10.
With the card installed, you may proceed with the speaker and software installation.
AUDIOTRAK MAYA 7.1 User's Guide - 8 -