Table of Contents
Advertisement
" ASIO resolution" is the bit rate used for the ASIO connection. The device pane allows to
select the bit rate used for the USB connection. But MAYA44 USB supports 16 bit. You don't
need to select the other bit rate.
"dithering" is only needed when the bit rate resolution of USB device is different than ASIO
resolution. It is not necessary to use this function with MAYA44USB.
"System Performance" changes buffer sizes and latencies. Higher values allow the use of more
plug ins, effects etc. at the same time but aren't fun playing virtual instruments live.
"swap LSB <-> MSB" might be necessary on some applications, usually it's LSB first on Windows,
MSB first on MAC. This option allows you to switch it, still you might not need it.
The application priority was always set to "high" by factory default. This brings the advantage
of having the audio thread on the necessary priority for low latency operation. The
disadvantage is that with some audio apps also graphic activity is getting more priority,
resulting in crackles. Be careful with the "Real time" mode – anyhow we don't save this setting
so you'll back to normal after restarting due to possible freezes.
AUDIOTRAK MAYA44 USB User's Guide
- 7 -
Advertisement
Table of Contents
