Audiotrak MAYA44 User Manual page 10

If you click the 'Controls button within the ASIO USB control panel, you'll see the below
mixer window.
You can control the 'Input Monitor Level', the 'Input Level' and the 'Output level' from the control
window.
If you're not clear with this chapter, please refer to the block diagram on the Page 24.
1. Monitor Level Control Section;
This section can be used to control the Input Monitor Level. You can monitor the
signals through the Input channel 1,2 and Input channel 3,4
individually and/or simultaneously. It will not affect the input level from the source. Even if
these faders are Muted, you can still record the signals from the source, but you are not able
to monitor the input source through the analog output.
Caution: Please never use the software input monitoring and the hardware input monitoring
simultaneously. You can't get accurate monitoring and it may causes the phasing problem to
the monitoring signal.
2. Input Level Control Section;
This section controls the real input level through the input ports. You can control all 4 inputs
using the one set of the stereo faders.
AUDIOTRAK MAYA44 USB User's Guide - 8 -