Cleaning The Surface Of The Backing/White Calibration Tile - Epson SpectroProofer Mounter 17 User Manual

SpectroProofer Mounter 17"
D
Use air to blow any dust and dirt off the lens in
ILS20EP/ILS20EPUV.
Warning:
w
Do not use flammable gas spray inside or
around this product.
Caution:
c
Do not touch the lens directly in ILS20EP/
ILS20EPUV.
E
Install ILS20EP/ILS20EPUV in the mounter, and
then close the front cover of the mounter.
U See the SpectroProofer Mounter 17" Setup
Guide
Cleaning the surface of
the backing/white
calibration tile
A
Open the side cover, and then unplug the printer
connection cable.
User's Guide
Maintenance
14
B
Remove the mounter.
C
Turn the mounter around, and then remove the
backing or the white calibration tile holder.
Caution:
c
Because the backing is fragile, do not drop or
knock it against hard objects.