Refrigerator Use - Roper RT14DKXSQ01 Use & Care Manual

Your refrigerator has twofront a djustable rollers - one ontheright
and oneontheleft.Ifyourrefrigerator seems u nsteady oryou
want t hedoors t oclose easier, adjust therefrigerator's tiltusing
theinstructions below.
Depending onyour m odel, yourrefrigerator may have leveling
legs (Style 1)orleveling screws (Style 2). T hey are part o fthe front
roller assemblies which are found atthebase oftherefrigerator on
either s ide.
1. Turn t heleveling legs orleveling screws t otheright t oraise
thatside oftherefrigerator ortothelefttolower thatside. I t
may take several turns toadjust thetiltoftherefrigerator.
NOTE: Having s omeone push against thetopofthe
refrigerator takes some weight offtheleveling screws and
rollers. This makes i teasier toadjust thescrews.
2. Open bothdoors a gain andbesure thatthey close aseasily
asyoulike. I fnot,tilttherefrigerator slightly m ore totherear
byturning b oth leveling screws totheright. I tmay take several
more turns, and youshould t urnboth leveling s crews the
same amount.
Style I
Style 2
3. Using a level, be sure that the refrigerator is still level side to
side. Readjust if necessary.
REFRIGERATOR USE
For your convenience, your refrigerator controls are preset at the
factory. When you first install your refrigerator, make sure that the
controls are still preset to the mid-settings as shown.
NOTE: To turn your refrigerator off, turn the refrigerator control to
the word OFF or until the word OFF appears. Your product will not
cool when the refrigerator control is set to OFE
Mid-setting "3"
OFF
COLD_S@
5 I
3
_OR_L
IMPORTANT:
• Give your refrigerator time to cool down completely before
adding food. It is best to wait 24 hours before you put food
into the refrigerator.
• If you add food before the refrigerator has cooled completely,
your food may spoil. Adjusting the Refrigerator and Freezer
Controls to a higher (colder) than recommended setting will
not cool the compartments any faster.