Complete Auto Channel Search; The Guide Plus+ System Setup - RCA 32F530TYX1 User Manual

Connections getup
Compiete Auto Channel Search
The next part of the SETUP asks if you want the IX! to search
for all available channels. This is sometimes called "auto
programming."
I. Press OK to tell the IX! to begin searching for channels. A
progress report appears on the screen.
2. When the screen on the IX/tells you the search [s
complete, press OK (the first GUIDE Plus+ system setup
screen appears).
No_c*:If you sklp Auto Chonnd Scarch no_ you c_n accessit later
_hroughthe Channel menu Scc,ChopPer 4 for morn dctoils
The GUIDE Plus+ System Setup
The GUIDE Plus+ system [s an on-screen interactive program
guide that lists what shows are on TV [n your area. In order to
receive program listings, you need to complete the following
steps.
The G-LIN K cable must be connected to the back of your IX/,
and the wands must be placed in front of the remote sensor
on your cable box and/or VCR [n order For the GUIDE Plus+
system to work (go back to page 7 for details}.
Step 1: Identifying Your TV's Location
Use the arrow buttons to select country and press OK. Then
use the digits or arrow buttons to enter your zip code or
postal code and press OK.
Step 2: Configuring for Cable
The next series of screens asks you about your cable setup.
If you use a cable box, you will need to identify the channel
you tune your IV to when using the cable box, and the brand
of cable box.
If your brand is not listed, choose "not listed" to run the test.
Follow the on-screen instructions to test your cable box.
Chapter 1
Graphics contained within this publication are for representation ont}4 9