Table of Contents
Advertisement
Using
1.
Press MENU (the TV31AIA"31PSVU appears).
2.
Highlight Cbanneland
press OK on your remot*, control.
3.
Highlight AJ¢to 7i¢ningand
press OK.
4.
Choose which channel you would like lo set:
Set VCR1 Channel
Displays a list that lets you set tip file channel that the
TV tunes to when you press tile VCR1 butlon on the remote.
Set VCR2 Channel
Displays a list that lets you set tip file channel that the
TV tunes to when you press tile VCR2 butlon on the remote.
Set DVD Channel
Displays a list that lets you select the channel that the
TV tunes to when you press tile DVD butlon.
Set SAT/CABLE
Channel
Displays a list that lets you set tip the channel
that the TV tunes to when you press SAToCABLE.
5.
Highlight the choice that matches the way you have the component
connected
to this TV, and press OK.
The choices and a brief explanation
Ibllow:
Not connected
Choose this if you don't have this particular component
connected
to the TV, or if you don't want the TV to automatically
tune to the
correct channel when you're using this component.
Channel2
(SAT/CABLE only)
Component
(satellite or cable box) is
connected
to the CABLE/ANTENNA jack on tile back of the TV, and you want
the TV to tune to channel 2 when you press the SKI'- CABLE button on the
remote. Reminder: make sure the component's
Channel 2/3/4 switch is set to
channel 2. Usually this switch is on the back of the component.
Channel3
Component
is connected
to file CABLE/ANTENNA jack on the back
of the TV, and you want the TV to tune to channel 3 when you press tile
corresponding
bullon on the remote. R_.minder: make sure the component's
Channel 3/4 switch is set to channel 3.
Channel 4
Component
is connected
to the CABLE/ANTENNA jack on the
back of the TV, and you want the TV to tune to channel 4 when you press the
corresponding
bullon on the remote. Reminder: make sure the component's
Channel 3/4 switch is set to channel 4.
Video Input
1
Component
is connected
to the INPUT1 VIDEO jack on tile
back of the TV and you want the TV to tune to VID1 Input Channel when you
press tile component
button.
Video
lnput2
Component
is connected
to the INPUT2
VIDEO
jack on tile
back
of the TV and you want
tile TV to tune to VID2 Input
Channel
when
you
press
tile component
button,
Note: You should choose Video Input 1or 2 for your VCR if you connected it to
the TV with audiotvideo cables.
37
Advertisement
Table of Contents
