Tape Counter; Use Memory-Stop Feature - RCA CC4251 User Manual

Tape Counter
The tape counter acts as a handy reference to help you locate tape segments.
The memory-stop feature helps locate a certain point on the tape. When the
tape counter appears, memory stop is automatically turned on.
DISPLAY CAMERA/
OFF/VCR
Button RESET Switch
F
O0
REWI
REVIEW EFWD Button
Button
STOP/EJECT
Button
Use the Memory-Stop Feature
1.
Place the camcorder in record-pause.
Make sure the displays appear in the
viewfinder. If they do not, press
DISPLAY.
2. Locate the place on the tape you want
to return to, and press RESET to reset
the counter to O000M.
O000M
.
28
Tape Counter With
Memory Stop
Continue to record or play the tape.
When you want to return to the place
.
you marked, press the REC/PA USE
button to stop recording or the STOP/
EJECT button to stop playback.
Press and hold the small button while
you set the CAMERA/OFF/VCR
switch to VCR.
5. Press the REW/REV1EW button. The
tape rewinds to the counter reading of
O000M.
Notes: Press DISPLAY to display the tape
counter. Whenever the tape counter is
displayed, memory stop is turned on.
Whenever memory stop is turned on, the
camcorder stops rewinding or fast forwarding
when the counter reaches 0000M. To continue
rewinding or fast forwarding, press the button
again.
The tape counter automatically resets to
0000M whenever a cassette is inserted.