Advertisement
the screen will display "Calibration complete" and then return to the settings menu.
Note: if the sensed point of contact deviates very far from the center of the actual point of
contact, it will require re-calibration.
13.3 Wallpaper setting: there are many sets of themed wallpapers to choose from.
13.4 Language selection: enter the show after the language choice.
13.5 System Time: You can set the date and time of the machine.
13.6 Auto power off time: 3 minutes, 5 minutes, 10 minutes, 15 minutes, 20 minutes, do not
shut down.
13.7 TV OUT settings:
TV OUT standard: HDMI576, HDMI720 choice--two high-definition format choice.
Display size: small, medium and large--- three sizes choice.
13.8 FM launch: the audio signal can be transmitted out locally for other machines to receive
(this feature optional, depending on the FM chip.)
13.9 Key sound: touching the icon of the key sound, it will turn on or turn off the key sounds.
13.10 System Information: Display system information and local disk capacity information.
USB Display Mode
14.1 This unit has a high-speed USB 2.0 interface with the standard removable disk function.
It supports windows2000 above systems (do not need to install driver). Connected with the
PC (pause a few seconds), it will display as on-line mode. It needs some time to install
some system document in the first time. After that, it will become very fast.
14.2 Charge display mode
The display will show “"Low power shutdown”" and the player will shut down automatically if the
battery power is low. You can charge the battery with the charger. The battery icon will show
pulses during charging. The battery display will show full grid once the charging is complete.
It will take about 4 hours to fully charge. (It has to charge 8 times at the first and the second
time.)
18
Advertisement
