Care And Cleaning - Hamilton Beach 19902 Use & Care Manual

840203501 ENv01.qxd:Layout 1

Care and Cleaning

1
Allow iron to cool.
Soleplate Care
To clean an iron's soleplate, preheat the iron to the highest
temperature setting and iron over a damp, 100% cotton cloth.
This creates heavy steam that transfers grime from the soleplate
to the cloth. Many irons have a Self-Clean Button. This will clean
the steam holes, but it will not remove grime from the flat surface
of the soleplate.
NOTE: Care should be used while cleaning; steam can burn.
10
1/16/12 9:06 AM Page 10
2
To empty water from iron, open
the water tank cover and slowly
tilt pointed end of iron over sink
until water runs out.
3
Do not store iron laying flat on
soleplate.
NOTICE: To avoid damage to the iron soleplate:
• Never iron over zippers, buttons, pins, metal rivets, or snaps,
since they may scratch the soleplate surface.
• Allow the iron to cool and wipe with a soapy, soft damp cloth to
clean occasional buildup on the soleplate. Never use abrasive
cleaners or metal scouring pads, since they may scratch the
surface.
CORD STORAGE
Optional feature on select
models.
Do not unwind the cord past the
red tape on the cord.