Dell Networking 7048 Configuration Manual page 1121

CLI Command
class-map-name
conform-color
class-map-name
[exceed-color
drop
cos-value
mark cos
dscp-value
mark ip-dscp
mark ip-precedence
interface
mirror | redirect
interface
exit
exit
exit
policy-map-
show policy-map
name
Description
Specify the color class for color-aware policing.
]
The action for the policy-class-map instance must
be set to police-simple before issuing the conform-
color command.
Specify that all packets for the associated traffic
stream are to be dropped at ingress.
Mark all packets for the associated traffic stream
with the specified class of service value (range: 0–7)
in the priority field of the 802.1p header.
Mark all packets for the associated traffic stream
with the specified IP DSCP value.
value
Mark all packets for the associated traffic stream
with the specified IP precedence value (range: 0–7).
Use mirror to mirror all packets for the associated
traffic stream that matches the defined class to the
specified destination port or LAG.
Use redirect to specify that all incoming packets for
the associated traffic stream are redirected to the
specified destination port or LAG.
Exit to Policy-Map Config mode.
Exit to Global Config mode.
Exit to Privilege Exec mode.
Displays configuration information for the specified
policy.
Configuring Differentiated Services
1121