Reviewing The Dtc400/Dtc300/Dtc300M Boot Up Sequence - FARGO electronics DTC400 User Manual

RESTRICTED USE ONLY

Reviewing the DTC400/DTC300/DTC300M Boot up Sequence

Step Process
1 On Power up, the Printer checks the current state of the Card Feed Sensor and
the Headlift Sensor.
2 If the Headlift Sensor is found to be open, the Headlift Motor will turn until a
closed state is seen.
3 If the Card Feed Sensor is found to be blocked, the Card Feed Stepper will
engage to eject the card.
DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1)
Fargo Electronics, Inc.
1-7