Displaying Fc Port Properties (Hba); Displaying Remote Port Properties - Dell Brocade Adapters Troubleshooting Manual

•
•
•
•
•
•
Displaying FCoE port properties
To display the HCM FCoE Port Properties panel, use these steps.
1. Select an FCoE port in the device tree.
2. Click the Properties tab in the right pane.

Displaying FC port properties (HBA)

Use HCM vHBA Properties to display FC port properties for HBAs or Fabric Adapter ports configured
in HBA mode. Properties include the following:
•
•
•
•
•
To display the HCM vHBA Port Properties panel, use these steps.
1. Select an FC port in the device tree.
2. Click the vHBA tab in the right pane.

Displaying remote port properties

Use the HCM Remote Port Properties panel to display properties that are associated with the
remote port, such as WWN, node WWN, port name, Fibre Channel address, frame data field size,
online or offline state, role (such as target or initiator), remote device information, QoS priority, QoS
flow, and target ID. Display this properties panel using the following steps.
1. From the device tree, select a remote port.
2. Click the Remote Port Properties tab in the right panel.
Brocade Adapters Troubleshooting Guide
53-1002145-01
Fabric WWN
Fibre Channel map ID
FCoE forwarder writing or nonwriting mode
Maximum speed supported
Port operating topology
Authentication status, algorithm, group, and error status
Port WWN
Node WWN
Path TOV (not displayed for Solaris systems)
Port log
I/O profile
If it is a target port, two tabs display in the right pane: Properties and LUNs.
Collecting port data
3
101