Sg Polling-Main - Linksys 4116 - EtherFast Switch User Manual

Chapter 1 Using the Cisco Multicast Manager
Fields and Buttons
Source
Filter Groups
Group
Filter Sources
Reset SG Lists
Router
Delta
Apply
Refresh Cache
SG Polling—Main
Using the CMM, you can poll sources and groups with high and low thresholds.
You can select the source and group from the list, or you can enter them manually. If there are a lot of
sources and/or groups, you can use the filter option, to ensure you are selecting an S,G that actually
exists in the network. The filter option displays only the sources for a selected group, or only the groups
for a selected source.
OL-7348-01
Using the Administration Tool
Description
Enter or select the IP address of the source to
monitor.
Filters the output to contain only the relevant
groups.
Enter or select the IP address of the group to
monitor.
Filters the output to contain only the relevant
sources.
Clears any entries and refreshes the source and
group lists.
Enter the router name.
Number of RPF failures per sampling period that
trigger a report.
Applies and saves the changes.
Click Refresh Cache to refresh the table of
sources and groups.
User Guide for the Cisco Multicast Manager 2.3.3
1-33