Ematic TWIG User Manual page 14

MENU button and press "Advanced", then un-tick the selection in the "Use static IP" box.
Press the MENU button and press "save" to complete this setting, see the figure as below:
Press the "back" icon once complete, this will return you to the Wi-Fi settings screen. For example,
double press "KW", then it will enter into an interface and ask you to input the code. Then input the
correct code, press "finish". Then the system will connect and distribute the IP address automatically, it
will show "connected" once the system has completed connecting. You can see the network connecting
status accordingly when you press the network name, see the figure shown below:
2. Manual Setup – static IP address:
TWIG User's Manual 13