Switch On/Off - Ematic TWIG User Manual

Note: It is best to use a finger nail to control this device. Using your fingertips to control the device is not
as accurate and may not perform the action you require. (For resistive touch panel only).

4.2 Switch On/Off

Switch ON and Unlock: When the device is in its OFF mode, press and hold the "Power" key for 3
seconds to enter the Android startup process. The device will take about 100 seconds to enter the
system desktop, with the LCD in locked mode, please press and slide the
and the LCD will unlock automatically, see the image below:
When the device is in use, it is recommended that it isn't powered OFF after use, but is put into
SLEEP mode instead, so that it is ready to be used almost instantly without having to start the Android
Operating System.
Power Saving Mode and Locked Mode: Pressing the "POWER" key when the device is in use will
result in the system entering SLEEP power save and locked mode. Pressing the "POWER" key or
tapping the touch screen for 3 seconds, will return the system to locked mode within 1 second.
TWIG User's Manual 9
icon to the green point,