Important Safety Precautions - Ematic EGL101 User Manual

MODIFICATIONS TO THE DEVICE. ANY SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE
EQUIPMENT.
Important Safety Precaution
Always follow these basic safety precautions when using your tablet. This will reduce the risk of fire, electric shock, product damage and personal
injury.
 Warning: Do not remove the cover or back to reduce the risk of electric shock. There are no user-serviceable parts inside. Refer servicing
to qualified personnel.
 Warning: Do not expose the tablet to rain or moisture to prevent fire or electric shock hazard.
 Do not expose the tablet to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the unit.
 Keep the tablet away from direct sunlight and heat source such as radiators or stoves.
 Do not block the ventilation openings. Slots and openings on the unit are provided for ventilation. The openings should never be blocked by
placing your tablet on a cushion, sofa or other similar surface.
 Do not place the tablet on unstable cart, stand, tripod, bracket or table. The unit may fall, resulting in possible damage or injury.
 Never place heavy or sharp objects on the LCD panel or frame.
 Only use the AC adapter included with tablet. Using any other adapter will void your warranty.
 Protect the power cord from being walked on or pinched particularly at plugs, receptacles and the point where the cord is attached to the
tablet.
 Unplug the power from the outlet when the unit is not in use.
Cleaning
 Before cleaning the tablet make sure it is turned off.
 Never spray or pour liquid directly onto the screen or plastic casing.
 To clean the LCD screen, wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. If it is still not clean,
apply a small amount of non-ammonia, non-alcohol based glass cleaner on a clean, soft, lint-free cloth to clean the screen.
 To clean the plastic casing, use a soft, dry cloth. If it is still not clean, apply a small amount of non-ammonia, non-alcohol based, mildly non-
abrasive detergent on a clean, soft, lint-free cloth to clean the surface.