Table of Contents
Advertisement
Connections
Setup
DVD Player
HDTV MONITOR
o
W + DVD + VCR
1. Connect your
DVD Player to your
TV.
A. Connect the audio {white and red) cables to the CMP1 L/MONO
and R Audio jacks on the back of the TV and to
the Audio Output jacks on the DVD player.
B. Connect three video grade cables to the CMP 1 Y, PB, PRjacks on the back of the TV and to the Y, PB, PRjacks on
the DVD player.
Notes.
If)lOUt DVDplayer does not have Y,, P B, P _ jaeks, but doeshave an S-Videojack, connect the player to the VID1S-VIDEO jack on the TVusing an
S-Videocable.
If )/ourDVDpla)/erdoes not have an S-Videojack, connectthe pla)/er to the VID1V(Video)jaek on the back of the TVusing a video cable.
Important: If )/ouuse the VID1S-VIDEO or V{Video) jaek to connect)/our TVto the DVDpla)/er,)/ou must connect the audio cables to the VID1
L/MONOand Rjacks on the 73/
2.
Connect
your VCR to your TV.
A. Connect
a coaxial
cable to the VCR's antenna
output
and to the ANTENNA/CABLE
Input jack on the TV.
B. Connect
the audio
{white and red) cables
to the V1D2 L/MONO
and R Audio jacks on the back of the TV and to
the Audio
Output
jacks
on the VCR.
C. Connect
the video
cable to the V1D2 V {Video) jack on the back of the TV and to the Video
Output
jack on the
VCR.
3.
Make
sure cable
or antenna
is connected
to your
VCR.
Connect
the coaxial
cable from your cable outlet
or antenna
to the antenna
input
on the VCR.
Go to page12
8
Graphics
contained
within
this publication
are for representation
only.
Chapter
1
Advertisement
Table of Contents
