Table of Contents
Advertisement
Getting
In & Out of the Guide
Plus+
System
To enter the GUIDE Plus+ system, press GUIDE on the remote.
There are three ways to exit the GUIDE Plus+ system:
Press OK to exit the GUIDE Plus+ system and tune to the
channel highlighted
in the Channel listing.
Press GUIDE to exit the GUIDE Plus+ system and tune to the
channel displayed
in the View window.
Press CLEAR to exit the GUIDE Plus+ system and return to the
original channel.
Downloading
Data
The GUIDE Plus+ system is not available
until it completes
its first
download
of program
information.
When the power is turned
off,
the TV locates a "host channel"
that carries GUIDE Plus+ data
containing
program
schedule and channel mapping
information.
A
channel map is the list of stations and their respective
channels.
To ensure that your first download
of data is complete,
you should
leave yourTV off overnight. Downloads
occur several times a day.
The TV must be turned off for GUIDE Plus+ data to download.
If the TV loses power or is unplugged,
GUIDE Plus+ program
information
may be lost. When power is restored,
make sure the
setup information
is still correct. The GUIDE Plus+ program
will
complete
a download
at the next available time.
The Different
GUIDE Plus+ System Menus
The GUIDE Plus+ system offers six different
options on the Menu
bar: GRID, SORT, SCHEDULE, MESSAGES, EDITOR and SETURTo
access the Menu bar:
1.
Press GUIDE to bring up the GUIDE Plus+ screen.
2.
Press MENU or use the up and down arrows to highlight
the
Menu bar.The Grid Guide comes up by default.
3.
Use the left and right arrows to access other menus.
4.
Press OK, MENU, or use the down arrow to access the menu
options.
0vc
VCl_2 A_× _A_.¢A_E
&A°&&
O_Q
GUIDE
oK_
CLEAR.""
Channel
Mapping
If more than one cable company
services your area, you may be
prompted with a Channel Mapping
screen after the first GUIDE Plus+
download. You will need to identify
your cable company by selecting
the correct channel numbers for the
stations in question. Use the left
and right arrows to change the
channel group and press OK when
the correct channel group is
highlighted.
Since the program information
provided by the GUIDE Plus+ system
is based on your locale, you will
need to run Setup again if you move.
I
39
Advertisement
Table of Contents
