Table of Contents
Advertisement
Using Your TV and Remote
With a Laserdisc Player: Programming and Basic Operation
Refer to your Laserdisc Player owner's manual to hook up your Laserdisc Player.
The remote may need to be programmed
for your laserdisc player.
Use the
codes below or on the sheet packed in with your remote.
Program
the remote
for
your Laserdisc
Player
Basic Operation
A. Point the remote at the laserdisc
player and hold LDISC.
B. Enter the code for your brand
from the code list below.
C. Release LDISC.
D. Press ON/OFF. If nothing
happens, try pressing LDISC
and then ON/OFF.
A. Tune TV to channel 00, 03, or 04.
B. Point the remote at the laserdisc
player and press LDISC.
C. Press ON/OFF to turn it on.
D. Use the buttons on the remote
that relate to laserdisc player
functions.
Not all buttons high-
lighted may work with your
laserdisc player.
E. Press ON/OFF to turn it off.
Laserdisc
Player Codes
I ........................
i
Pro_an .......................33
RCA.............................33
14
Advertisement
Table of Contents
