Table of Contents
Advertisement
Using Your TV and Remote
With Remote Buttons
1.
Power
Buttons
OFF
Turns off the TV.
Turns off compatible
VCRs.
ON/OFF
Turns on a component
after a
component
button is pressed.
Turns off components
except audio
equipment.
TV
Turns on the TV.
Shows the displays
on the screen.
Sets the remote to control
the TV.
See Using the Remote with a VCR,
Cable Box, Laserdisc Player and Audio
equipment on pages 8-15.
2. TV Buttons
CLEAR
Clears menus and displays
from
the screen.
DISPLAY
Shows displays
on the screen.
Clears menus from the screen.
SKIP:30 (Commercial Skip)
Allows you to scan other channels
during
commercials.
Each press adds 30 seconds.
TV
switches
back to original channel
when time runs out. Press CLEAR
to cancel SKIP.
VOL + and --
(Volume up and down)
Raises and lowers sound.
Moves left and right on a menu
line. See Menu Basics on page 5.
Changes
a feature setting.
MUTE
Switches
the TV sound on or off.
CHAN A and v
(Channel up and down)
Scans up and down through
channels in the TV's memory.
Moves up and down menus.
See
Menu Basics on page 5.
Moves through
channels
in VCR's memory.
PREV CH (Previous Channel)
Changes back and forth between
two channels.
Select a channel and then select
another.
Press PREV CH to switch
between
the two channels.
MENU
Shows menus on the screen and
moves from menu to menu.
RESET
Returns the picture adjustments
to
the original settings.
DONE
Saves the setup of a feature
and
removes
the menu
from
the screen.
3.
Number
Buttons
(0-9)
Selects any channel number.
Two numbers must be pressed for
each channel.
Press 0 and 6 for
channel 6.
For three digit channels,
press and
hold 1 until 1-- appears
on the
screen. Then press the other two
numbers.
Advertisement
Table of Contents
