Trouble Checks - RCA CTC175 Owner's Manual

References
Trouble Checks
Trouble
Remote
Buttons don't work when you
press them
Works part or none of the
time
Can't select certain channel
Checks and Adjustments
Press "IV to set the remote to control the TV. See buttons on page 6-7.
Clear the path between the remote and TV of any objects.
Aim the remote at the component you are trying to control.
Press "IV so remote will control TV.
Make sure batteries in the remote are not dead.
See if batteries are placed in remote correctly. See batteries, page 2.
Press number buttons. Channel may not be in memory. See autoprogram
on page 18.
Make sure TV/VCR switch on VCR is in the TV position.
For numbers over 100, press and hold I Until 1-- appears, then press the
other two numbers.
Set Cable/Air feature to Cable for channels higher than 69. See page 23.
TV Turns on or off.
Turns off by itself
Turns on by itself
Does not turn off at
Alarm Time
Check Sleep Timer. See sleep timer on page 20.
•Wait 30 seconds and turn on again, a power surge may have occurred.
Check Alarm Off time. See alarm clock on page 21.
Check Alarm On Time. See alarm clock on page 21.
Check clock time. See clock on page 3.
Make sure alarm is turned on or off. See alarm clock on page 21.
Check clock time. See clock on page 3.
27