Troubleshooting - Electrolux Z2100 Owner's Handbook Manual

Troubleshooting

In case of malfunction, check for the following probable reasons. Make the necessary
corrections which may be performed at home. If the problem persists, consult the Electrolux
Authorized Service Centre.
PROBLEM
The vacuum cleaner
does not start.
Reduction of
suction capacity.
Over heating
POSSIBLES CAUSES
The plug is not properly
connected to the socket.
Thermal protector
activated due to motor
high temperature.
Suction hose blocked.
Nozzle blocked.
Full disposable
dust bag.
Damaged or broken hose.
Dust bag is full.
CORRECTIONS
Check the plug connection
or try another socket.
Press the ON/ OFF button
and wait 30 minutes for the
motor to cool off.
Clean the hose.
Clean the nozzle.
Replace the disposable
dust bag.
Change the hose.
Replace the disposable
dust bag.
7