Electrolux Z2100 Owner's Handbook Manual page 4

• Do not use without dust bag and
without filters in place.
• If the motor overheats, it will turn off
automatically. If this occurs, press the
on off button and wait a few minutes
before turning it back on.
• Extra care should be taken when
vacuuming staircases.
• It is dangerous to alter the
specifications or modify the vacuum
cleaner, only use accessories
re c o m m e n d e d b y E l e c t ro l u x .
• Under no circumstances should the
customer attempt to repair the vacuum
cleaner.
• The vacuum cleaner should only be
repaired and/or serviced by an
authorized Electrolux service centre
and only genuine Electrolux spare parts
should be used. Failure to do so may
render the warranty void.
This vacuum cleaner is for household
use only.
Important !
This vacuum cleaner must only be
connected to a power supply whose
voltage and frequency comply with
the specifications given on the
appliance rating plate.
Quick Guide
When taking the product out of its
packaging, check for damages.
2
4
1
1. Insert the flexible hose into the air
entrance.
2. Press until it clicks into position.
3. Fit the tube to the hose.
4. Fit the extension tubes.
5. Fit the chosen nozzle.
Pull the required length of electrical cord
out of the cleaner and connect the plug
to the wall socket.
Note : The yellow mark on the electrical
cord indicates the maximum length of
usable cord. Never unwind the electrical
cord beyond the red mark.
Press the on/off foot pedal to switch the
cleaner on.
The suction power can be adjusted by
sliding the power regulation button upwards
or downwards.
3
4
5