Replacing The Lamp; Closing The Door - AEG A92860GNX0 User Manual

Hide thumbs Also See for A92860GNX0:
Table of Contents

Advertisement

18
What to do if...
Problem
The appliance does not
operate.
No ice.
The ice dispenser lamp and
the child look indicator
flashes.
The lamp does not work.
Door interferes with venti-
lation grill.
Misaligned door.
As much as the advice does not lead to result, call the nearest brand-mark service.

Replacing the lamp

The appliance is equipped with a longlife LED interior light.
Only service is allowed to replace the lighting device. Contact your Service Center .

Closing the door

1.
Clean the door gaskets.
2.
If necessary, adjust the door. Refer to "Installation".
3.
If necessary, replace the defective door gaskets. Contact the Service Center.
Possible cause
The appliance is switched off.
The mains plug is not connected
to the mains socket correctly.
The appliance has no power.
There is no voltage in the mains
socket.
The ice maker is not switched
on.
No water supply.
Leakage in the connection box.
The ice channel in the door is
blocked.
No water supply.
The lamp is defective.
The door has been open to long.
The appliance is not levelled.
The appliance is not levelled.
Solution
Switch on the appliance.
Connect the mains plug to the
mains socket correctly.
Connect another electrical appli-
ance to the mains socket. Check
fuse. Contact a qualified electri-
cian.
Refer to "Switching on and off
the ice maker".
Carry out the necessary measures
on the water supply.
Contact service.
Remove the obstacle.
Carry out the necessary measures
on the water supply.
Reset the system by pressing the
button 2 on the ice dispenser.
Refer to "Replacing the lamp".
Close the door.
Refer to "Levelling".
Refer to "Levelling".

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents