Edimax PT-31E Quick Installation Manual
Hide thumbs
Also See for PT-31E:
- User manual (112 pages) ,
- User manual (99 pages) ,
- User manual (99 pages)
Related Manuals for Edimax PT-31E
Summary of Contents for Edimax PT-31E
- Page 1 PT-31E/PT-31W Quick Installation Guide 06-2012 / v1.0...
- Page 2 COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd.
-
Page 3: Package Contents
PACKAGE CONTENTS Before you start using this product, please check if there is anything missing in the package, and contact your dealer to claim the missing item(s): 1 x Network camera 1 x Power adapter 1 x Ethernet cable ... - Page 4 Step 2: Insert mounting plate B into the slot at the bottom of the network camera. Step 3: Screw mounting plate B to the network camera via the 2 holes indicated by the arrows. Step 4: Mount the network camera on to the wall.
- Page 5 Step 5: Screw mounting plate A and B together via the hole indicated by the arrow. Step 6: When mounted on the wall, the cables can pass through mounting plate A as shown in the diagram. Step 7: Connect an Ethernet cable to the network camera via the Ethernet port.
- Page 6 Step 8: Insert the DI/DO signal cable(s) into the DI/DO port. If you do not have DI/DO accessories, you can skip this step. Step 9: Connect the power adapter to the network camera, then plug the power adapter into a wall socket. The camera’s LED lights should light up after a few seconds, and the camera will test its pan and tilt...
- Page 7 - Mac is not supported. 1. Insert the CD into your CD-ROM drive. When the wizard appears, click “Setup Utility” to install the “EdiView Finder” software. Note: The contents of the CD-ROM can also be downloaded from the Edimax website: http://www.edimax.com/en/index.php...
- Page 8 2. After the installation is complete, double-click the “EdiView_Finder” icon to execute the application. 3. Click “Discover” to search for all the network cameras on your local network (make sure all the network cameras are powered on and connected to the network first). 4.
- Page 9 6. The browser might ask you to install the ActiveX plug-in. Allow the browser to install the plug-in when prompted or you will not be able to see the video from the network camera. For IE 8 and earlier versions: For IE 9, the notification will be displayed at the bottom of Internet Explorer: Click ‘Allow’...
- Page 10 When you’re installing Internet Explorer plug-in, you may also be asked if you want to allow changes to be made to your computer: Click “Yes” to allow changes. After ActiveX plug-in is installed, you should be able to see the video stream from the camera.
- Page 11 Wireless Setting Wi-Fi Connection using WPS Method 1: WPS BUTTON Step 1: Power on the wireless AP and the wireless network camera. Wait for 1 minute for both devices to be up and running. Step 2: Press the WPS button of the wireless AP. The WPS LED status will usually flash to indicate that WPS is active –...
- Page 12 Method 2: PIN CODE SETTING Step 1: Power on the wireless AP and the wireless network camera. Wait for 1 minute for both devices to be up and running. Step 2: Open a web browser and login to the wireless server. Go to the wireless/WPS setting page.
-
Page 13: Federal Communication Commission Interference Statement
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. - Page 14 EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC, 2006/95/EC. French: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2004/108/EC, 2006/95/EC. Czechian: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2004/108/EC, 2006/95/EC.
-
Page 15: Declaration Of Conformity
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European directive 2004/108/EC and 2006/95/EC. Equipment: 3Mpx PoE Day & Night PT Network Camera Model No.: PT-31E Report No.: T110906220-E, T110906220-LV... - Page 16 Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directive and EMC directive, ETSI. Equipment: 3Mpx Wireless Day & Night PT Network Camera Model No.: PT-31W...
- Page 17 Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code.
- Page 18 intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.
- Page 19 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’...