You can manage all the connected powerline adapters with the utility software. Only install
the utility software when you need to add other powerline adapters without "Group" or
"Encrypt" button.
Step 1 Before installing the utility software, make sure that no other powerline utility is
installed on your computer. If any other utility software is installed, uninstall it and
reboot the computer.
Step 2 Insert the CD into your CD‐ROM drive. When the following "Autorun Wizard"
appears, select your model.
Note: If autoplay is installed on your computer, the "Autorun Wizard" will start
automatically. Otherwise, please go to Autorun folder in the CD and execute the
"AutoRun.exe" program.
Chapter 4: Utility Software Installation
8