Whirlpool Cabrio WTW5610XW1 Use And Care Manual page 15

TROUBLESHOOTING
f First try the solutions suggested here or visit our website at www.whirlpool.com/help -_
for assistance and to possibly avoid a service call.
Add an Extra Rinse to the selected cycle. Sand, pet hair, lint, etc.
on load after washing
Heavy sand, pet hair, lint, and
detergent or bleach residues
may require additional rinsing.
Washer not loaded as recommended. Load is tangling
Not cleaning or Wash load not completely
removing stains covered in water.
Added more water to washer.
Washer not loaded properly.
Not using HE detergent or using too
much HE detergent.
Not using correct cycle for fabric type.
Not using dispensers.
Not washing like colors together.
Normal dispenser operation.
Small amount of
water still in
dispenser after
_ycle
See "Using Your Washer" section.
Select a cycle with a slower wash action and spin speed,
however items will be wetter than those using a higher speed
spin. See the Cycle Guide to match your load with the best cycle.
Load garments in loose heaps evenly around the basket wall.
Reduce tangling by mixing types of load items. Use the
recommended cycle for the type of garments being washed.
Washer senses load size and adds correct amount of water.
This is normal and necessary for clothes to move.
Added water lifts the laundry off the washplate, resulting in less
effective cleaning.
Washer is less efficient at cleaning when load is tightly packed.
Load garments in loose heaps evenly around the basket wall.
Load with dry items only.
Add only 1 or 2 garments after washer has started.
The suds from regular detergent can keep washer from
operating correctly.
Use only HE detergent. Be sure to measure correctly.
Always measure detergent and follow manufacturer's directions
based on load size and soil level.
Use a higher soil level cycle option and warmer wash
temperature to improve cleaning.
If using Quick Wash cycle, wash only a few items.
Use Whites and Heavy Duty cycle for tough cleaning.
See the Cycle Guide to match your load with the best cycle.
Use dispensers to avoid chlorine bleach and fabric softener
staining.
Load dispensers before starting a cycle.
Avoid overfilling.
Do not add products directly onto load.
Wash like colors together and remove promptly after the cycle is
complete to avoid dye transfer.
It is normal for small amounts of water to remain in dispenser.
J
15