Drying, Cycle And Temperature Tips; Cycles; End Of Cycle Signal - Whirlpool THIN TWIN YLTE5243DQ3 Use & Care Manual

_ _ _'_ i _ _ I _/1 _ _/_ _ = .
Select the correct cycle and temperature for your load.
Cool Down tumbles the load without heat during the last few
minutes of all cycles to make the load easier to handle.
Drying tips
• Follow care label directions when they are available.
• If you use fabric softener sheets, use only ones labeled as
dryer safe. Follow package instructions.
• Remove the load from the dryer as soon as tumbling stops to
reduce wrinkling. This is especially important for permanent
press, knits, and synthetic fabrics.
Cycle and temperature tips
• Dry most loads using the Energy Preferred Automatic
Setting (*).
• Use a High heat setting for drying heavyweight items such as
towels and work clothes.
• Use a Low heat setting for drying lightweight items such as
lingerie, blouses, dresses, and some knits.
• Use a no heat (air) setting for rubber, plastic or heat-sensitive
fabrics.
• Line dry bonded or laminated fabrics.
If you are unsure of the temperature to select for a load, select a
lower setting rather than a higher setting.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
Automatic __ Automatic
Regular Permanent
(High Heat} Press
;lll;,==D2°'°_l,,_g _
(Low . oat_
Fluff Air '_"_JJ_ O_ed
Timed ry'ing
(High Heat}
Cycle Control knob
Automatic Cycle(s)
Dry most loads using the Energy Preferred Automatic Setting (*).
Your Automatic cycle(s) shuts off when the selected dryness is
reached. The Cycle Control knob will not move until the load is
almost dry. After the cool down, the knob automatically turns to
an Off area and tumbling stops.
• If the load is drier than you like, select Less Dry the next time
you dry a similar load.
• If the load is not as dry as you would like, complete drying
using a Timed Drying cycle. Select Very Dry the next time you
dry a similar load.
Your dryer has both a High Heat cycle (Regular and Timed
Drying) and a Low Heat cycle (Permanent Press). Always follow
care label directions when available, especially for delicate items.
NOTE: The Automatic cycles use an automatic dryness control
that senses the exhaust temperature and determines the dryness
of the load.
Timed Drying Cycle
Your dryer offers High Heat in the Timed Drying cycle. Use the
Timed Drying cycle to complete drying if some items are damp
after Automatic drying. Timed Drying is also useful for:
• Bulky items and large loads that require a long drying time.
• Damp drying items; turn the Cycle Control knob to 30
minutes or less.
TUMBLE PRESS _ Feature
The TUMBLE PRESS feature removes wrinkles from clothes that
have been packed in a suitcase, or from items not removed from
the dryer at the end of a cycle. Put only a few items in your dryer
for best results when using this feature. As soon as the dryer
stops, fold or put the items on hangers.
Fluff Air Cycle
Use the Fluff Air cycle for items that require drying without heat
such as rubber, plastic and heat-sensitive fabrics. This chart
shows examples of items that can be dried using the Fluff Air
cycle.
Type of Load Fluff Air*
Foam rubber - pillows, padded bras,
stuffed toys 20 - 30
Plastic - Shower curtains, tablecloths 20 - 30
Rubber-backed rugs 40 - 50
Olefin, polypropylene, sheer nylon 10 - 20
(*Minutes) Reset cycle to complete drying, if needed.
When using Fluff Air
• Check to see that coverings are securely stitched.
• Shake and fluff pillows by hand periodically during cycle.
• Dry item completely. Foam rubber pillows are slow to dry.
The dryer sounds a signal to let you know when the cycle is
finished. The signal is helpful when you are drying permanent
press, synthetics and other items that should be removed from
the dryer as soon as it stops. The signal is not adjustable and
cannot be turned off.
11