Dryercare; Cleaning The Dryer Location; Cleaning The Lint Screen; Cleaning The Dryer Interior - Whirlpool Gold GGW9868KL5 Use & Care Manual

Electronic electric and gas dryers
Hide thumbs Also See for Gold GGW9868KL5:
Table of Contents

Advertisement

Available languages

Available languages

This chart s hows e xamples ofitems thatcanberack dried. A fter
selecting theRack Dry cycle, select thetemperature
setting and
drying t ime across f rom each item.
Rack Dry
Temp
Time*
Wool Sweaters
Block to shape and lay flat on the rack
Low
60
Stuffed toys or pillows
Cotton or polyester fiber filled
Low
60
Stuffed toys or pillows
Foam rubber filled
Air Only
90
Sneakers or canvas shoes
Air Only
90
*(Minutes) Reset time to complete drying, if needed. (Drying time
will depend on amount of moisture items hold.)
DRYERCARE
Keep dryer area clear and free from items that would obstruct the
flow of combustion
and ventilation air.
2. Push the lint screen firmly back into place.
IMPORTANT:
Do not run the dryer with the lint screen loose, damaged,
blocked, or missing. Doing so can cause overheating and
damage to both the dryer and fabrics.
Some towels made of synthetic fibers and natural fibers
(polyester and cotton blends) may shed more lint than other
towels, causing your dryer's lint screen to fill up faster. Be
sure to remove lint from the lint screen before and after drying
new towels.
If lint falls off the screen into the dryer during removal, check
the exhaust hood and remove the lint. See "Checking Your
Vent."
As needed cleaning
Laundry detergent and fabric softener residue can build up on the
lint screen. This buildup can cause longer drying times for your
clothes, or cause the dryer to stop before your load is completely
dry. The screen is probably clogged if lint falls off the screen.
Clean the lint screen with a nylon brush every 6 months or more
frequently if it becomes clogged due to a residue buildup.
To wash
1. Roll lint off the screen with your fingers.
2. Wet both sides of lint screen with hot water.
3. Wet a nylon brush with hot water and liquid detergent. Scrub
lint screen with the brush to remove residue buildup.
Explosion
Hazard
Keep flammable
materials
and vapors, such as
gasoline,
away from dryer.
Place dryer at least 18 inches (4G cm) above the
floor for a garage installation.
Failure to do so can result in death, explosion,
or fire.
/1_
_
_ __
I; ¸ _
Every load cleaning
The lint screen is located in the door of the dryer. Clean it before
each load. A screen blocked by lint can increase drying time.
To clean
1. Pull the lint screen straight up. Roll lint off the screen with
your fingers. Do not rinse or wash screen to remove lint. Wet
lint is hard to remove.
4. Rinse screen with hot water.
5. Thoroughly dry lint screen with a clean towel. Replace screen
in dryer.
To clean dryer drum
1. Make a paste with powdered laundry detergent and very
warm water.
2. Apply paste to a soft cloth.
OR
Apply a liquid, nonflammable
household cleaner to the
stained area and rub with a soft cloth until all excess dye is
removed.
3. Wipe drum thoroughly with a damp cloth.
4. Tumble a load of clean cloths or towels to dry drum.
NOTE: Garments which contain unstable dyes, such as denim
blue jeans or brightly colored cotton items, may discolor the
dryer interior. These stains are not harmful to your dryer and will
not stain future loads of clothes. Dry unstable dye items inside
out to prevent dye transfer.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gold ggw9868kq5Gold ggw9868kt5

Table of Contents