Table of Contents
Advertisement
Fire Hazard
Never place items in the washer that are
dampened with gasoline or other flammable
fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of
oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
1. Measure detergent and pour it into the washer. If desired, add
powdered or liquid color safe bleach. Add extra detergent for
the Super Wash cycle.
Drop a sorted load of clothes loosely into your washer.
•
Load evenly to maintain washer balance. Mix large and
small items.
•
Items should move easily through the wash water.
Overloading
can cause poor cleaning.
•
To reduce wrinkling of permanent press clothes and some
synthetic
knits, use a large load size to provide more
space (see step 5).
2.
(OPTIONAL STEP) Pour measured liquid chlorine
bleach
into the liquid chlorine bleach dispenser. Bleach will be
dispensed automatically during the wash part of the cycle.
See "SMART BLEACH
TM
Timed Bleach Dispenser."
•
Never use more than 1 cup (250 mL) for a full load. Use
less for a smaller load size.
•
Follow the manufacturer's
directions for safe use.
•
To avoid spilling, use a cup with a pouring spout. Do not
let bleach splash, drip, or run down into the washer
basket.
•
Use only liquid chlorine bleach in this dispenser.
3.
(OPTIONAL STEP) Pour measured liquid fabric softener
into
the liquid fabric softener dispenser. Softener is added
automatically during the rinse portion of the cycle.
Dilute liquid fabric softener by filling the dispenser with warm
water until liquid reaches the crossbar in the opening.
•
Do not spill or drip any fabric softener on the clothes.
•
Use only liquid fabric softener in this dispenser.
4. Close the washer lid.
5. Turn the LOAD SIZE selector to the correct setting for your
wash load and the type of fabric being washed.
•
Choose a load size that allows the load to move freely for
best fabric care. See "Loading."
•
You may change the load size selection after the washer
has started filling by turning the selector to a different
setting,
6
Advertisement
Table of Contents
