Remote Control - VIORE PD50VH80 Operating Instructions Manual

User Guidance Information
Remote Control
• Functions of remote control buttons
The remote control is using Infra-Red (IR). Point it towards the front of the LCD TV. The remote control may not
work correctly if it is operated out of range or out of angle.
1. POWER
Press to turn the TV on/standby
2. NUMBER BUTTONS
To select the program directly. 1
e.g.:
Select channel 5, press "5" button.
Select channel 62 2
press "6" button, and press "2"
button in 2 seconds.
Select channel 152
press "1" button, and press "5"
button, then press "2" button
in 2 seconds, select channel "5-1",
press "5" then "-/--" and "1".
3. VOL+/-
Volume +/- 3
4. EXIT
Press to exit form the OSD menu.
5. THU MBSTICK( A / T/_1/1_/OK) 4
Allows you to navigate the
on-screen menus and adjust the
system settings to your
preference. 5
6. CC
Press to display the closed caption.
7. MTS
Press to select the audio channels. 8
8. PICTURE 9
Press repeatedly to cycle
through the available video
picture modes.
9. SOUND
Press to cycle through the
different sound settings.
10. CH.LIST
10 Used to display the channel list.
11. INPUT
11 Press to display the input source
menu.
12.
Press to Return to the previous
channel viewed.
13. MUTE
Press to mute the sound. Press
again or press VOL+ to unmute.
12 14. CH+/-
13 Channel/Program +/-
15. MENU
Press to display the OSD menu.
I4
16. FAV
Press to display the favorite
channels list.
!5 17. EPG
Press to enter the EPG menu
directly.
18. DISPLAY
Displays the program information.
19. SLEEP
16 Press to setup the sleep time
17 among: 5min, 10min, 15min, 30min,
I8 45min, 60min, 90min, 120min,
19 180min, 240min and off.
GB-8