Safety And International Symbols - Troy-Bilt TB20CS Operator's Manual

SAFETY
AND _NTERNAT_ONAL
SYMBOLS
This operator's manual describes safety and international symbols and pictographs that may appear on this product.
Read the operator's manual for complete safety, assembly, operating and maintenance and repair information.
SYMBOL MEANING SYMBOL
, SAFETY ALERT SYMBOL •
Indicates danger, warning, or
caution. May be used in conjunction
with other symbols or pictographs.
', WARNING - READ OPERATOR'S
MANUAL
Read the Operator's Manual(s) and
follow all warnings and safety
instructions. Failure to do so can
result in serious injury to the
operator and/or bystanders.
WEAR EYE AND HEARING
PROTECTION
WARNING: Thrown
objects and loud noise can cause
severe eye injury and hearing loss.
Wear eye protection meeting ANSI
Z87.1-1989 standards and ear
protection when operating this unit.
Use a full face shield when needed.
I
O
MEANING
,, THROWN OBJECTS AND
ROTATING CUTTER CAN CAUSE
SEVERE INJURY
WARNmNG: Donot
operate without the cutting
attachment shield in place. Keep
away from the rotating cutting
attachment.
', ON/OFF STOP CONTROL
ON / START / RUN
,, ON/OFF STOP CONTROL
OFF or STOP
', HOT SURFACE WARNmNG
Do not touch a hot muffler or
cylinder. You may get burned. These
parts get extremely hot from
operation. When turned off they
remain hot for a short time.
', KEEP BYSTANDERS AWAY
WARNmNG: Keepa,
bystanders, especially children and
pets, atleast 5 0 feet (I 5 m.)fromthe
operating area.
', OIL
Refer to operator's manual for the
proper type of oil.
UNLEADED FUEL
Alwaysuse clean, fresh unleadedfuel.