Verify The Radios Are Ready To Be Activated; Figure 3-2. Aux-Xm Information Page; Figure 3-3. Aux - Xm Radio Page - Garmin GRT 10 Transceiver Instructions Manual

Xm satellite radio activation instructions
Hide thumbs Also See for GRT 10 Transceiver:
Table of Contents

Advertisement

5. Rotate the inner FMS knob clockwise until the AUX-XM INFORMATION page is displayed.
Press the INFO smart key to view your Audio Radio ID and Data Radio ID. See Figure 3-2 for
these locations.
6. A list of Weather Products will also be shown on the bottom half of the screen. Boxes filled in
green will correspond with the type of subscription you have access. For example, if the weather
subscription you have purchased allows NEXRAD, the box next to NEXRAD will be green.

3.1 Verify the Radios are Ready to be Activated

The AUX - XM INFORMATION page has two modes, Radio Information and Radio Operation. The
page should default to INFO mode (if the radio is not activated). You will need to be on this page when
you call for activation. You can change modes with the RADIO/INFO soft keys. The INFO page should
look like Figure 3-2.
Pressing the RADIO smart key will display the AUX – XM RADIO page and will look similar to
Figure 3-3. If the radio is inactivated and working properly the G1000/G900X/G950 will display the
free-to-air channels, which are channel 0 (Radio ID) and channel 1 (XM Preview). If you can see the free-
to-air channels and can hear channel 1, you are ready to activate your radios. Press the soft key under
INFO and the page will return to the INFO page.
Page 8
GDL 69/69A XM Satellite Radio Activation Procedures
Page Mode - Default

Figure 3-2. AUX-XM Information Page

Figure 3-3. AUX – XM Radio Page
INFO
mode
190-00355-04
Rev. K

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gdl 69 seriesGdl 69aGdl 69hGdl 69ahGdl 69

Table of Contents