Converting To Side-Discharge; Removing Grasscatcher - Troy-Bilt 436 Operator's Manual

21" rear & side discharge mulching
Hide thumbs Also See for 436:
Table of Contents

Advertisement

b-
Figure 9
,_
WARNING:
Never operate the mower
unless the hooks on the grass catcher are
seated in the slots on the handle bracket
assemblies, and the rear discharge door rests
firmly against the top of the grass catcher.
Removing GrassCatcher
Lift the rear discharge door on the mower.
Lift the grass catcher up, out of the slots in the
handle bracket assemblies.
Reinstall the plastic rear mulching baffle.
Release the rear discharge door.
Converting to Side-Discharge
Mulching
Plug
Pin
(Side
Chute
Deflector
Figure 10
Your mower has been shipped as a mulcher. To
convert it to a side-discharge mower, lift the
mulching plug. Slide the two hooks on the side-
discharge deflector under the hinge pin on the
mulching plug assembly. Lower the mulching plug.
See Figure 10.
Do not remove the side mulching plug at any time,
even when you are not mulching.

Advertisement

Table of Contents
loading

Table of Contents