Marking Desired Scenes; Changing Angles; Changing Soundtrack Language; Subtitles - Sharp Aquos LC-19DV28UT Operation Manual

Watching the DVD
The TV/DVD stores the points that you want to watch
again up to 12 points.
You can resume playback from each scene.
Marking the scenes
1 Press MARKER during playback.
Select the blank Marker using A/T/41/_, then
press ENTER at the desired scene.
• Up to 12 scenes can be selected.
• Repeat this procedure to set the other 11 scenes.
3 Press MARKER to return to the normal screen.
Returning to the scenes
1 Press MARKER during playback or stop mode.
2 Press A/T/_/_ to select the Marker 1-12.
3 Press ENTER.
Playback starts from the marked scene.
To cancel the Marker
Follow the above steps 1-2, then press CANCEL.
• Some discs may not work with the marking operation.
• The marking is cancelled when you eject the disc or turn
the power off.
• Some subtitles recorded around the marker may fai! to
appear.
When playing back a disc recorded with multi-angle
facility, you can change the view angle.
1 Press ANGLE during playback.
The current angle will appear.
You can select the language when you play a
multilingual disc.
1 Press AUDIO during playback.
The current soundtrack language will appear.
Press AUDIO repeatedly until the desired
language is selected.
The on-screen display will disappear after a few
seconds.
• If the desired language is not heard after pressing AUDIO
several times, the language is not recorded on the disc.
• Changing soundtrack language is cancelled after
"Resume off".
The initial default language or available language will be
heard if the disc is played back again.
Changing the subtitle language
You can select the language when playing back a disc
recorded with multilingual subtitles.
1 Press SUBTITLE repeatedly during playback until
your desired language appears.
The on-screen display will disappear after a few
seconds.
2 Press ANGLE repeatedly until the desired angle is
selected.
• In case of JPEG-playback, the JPEG-image is rotated
90 degrees to the right.
• Depending on the DVD, you may not be able to change
the angles even if multi-angles are recorded on the DVD.
Turning the subtitles off
Press SUBTITLE during playback until "Off" appears.
• Changing subtitle language is cancelled after "Resume
off".
• Some functions may not work on some DVDs. You may
not be able to turn subtitles on or off or change subtitles.
While playing the DVD, the subtitle may change when:
- you eject or insert the disc.
- you change the title.
• In some cases, the subtitle language is not changed to the
selected one immediately.
(_-31