Sharp AQUOS LC-40D68UT Operation Manual

Hide thumbs Also See for AQUOS LC-40D68UT:

Service manual (74 pages)

Table Of Contents

Table of Contents

Quick Links

Summary of Contents for Sharp AQUOS LC-40D68UT

Page 1 SHARR AQUOS LC-40D68UT LIQUID CRYSTAL TELEVISION r][] OOLBY HE3m| DIGITAL ....,,.._ ..IMPORTANT : Please read this operation manual 1245 before starting operating the equipment. NYCE Supplied Accessories Make sure the following accessories are provk_ed with the product, emote control unit (x 1) "AA"...
Page 2 DECLARATION OF CONFORMITY: SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-40D68UT This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference,...
Page 3 Sharp at 1-800-BE-SHARP (For U.S.A. only) This product qualifies for ENERGY STAR when "Home" is selected for "TV Location". Setting "TV Location" to "Home" allows the TV to achieve an energy-saving status for household use.
Page 4 DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, p_ease read the important Safety instructions carefully before using this product, IMPORTANT SAFETY INSTRUCTIONS...
Page 5 iMPORTANT SAFETY iNSTRUCTiONS t_o Outdoor Antenna Grounding If an outside antenna is EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANSVNFPA connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against ANTENNA voltage surges and built-up static charges.
Page 6 • To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs. Call f-800 BE-SHARP for...
Page 7 • This TV shouJd be mounted on the wall with both o Before performing work spread cushioning over the base the AN-g7AG2 (SHARP) wall mount bracket and the area to lay the TV on. This will prevent it from being...
Page 8 IF THE UNIT DOES NOT POWER ON UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS. IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT • Speakers cannot be detached from the -[V. US AT 1 800 BE-SHARP. TV angle cannot be adjusted.
Page 9 Preparation To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of tile types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohrn coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set.
Page 10 Part Names Remote control sensor _} _ ..oPc ..*(Seepage 18,) ® OPO indicator (See page 18,) POWER indicator (See page 12,)_ * QPO: Optical Picture Control "1 Antenna/Cabb INPUT 3 _3Ftr:ll_ I OUTPUT termina,s Zl® p--,NPUT, term'na'e terminals 9,'1®it+ _"PUT 2terminals INPUT 5 terminal...
Page 11 Connecting to External Equipment You can connect many types of external equipment to your TV. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See page 1 5.) For connecting the TV to external equipment, use commercially available...
Page 12 Watching Press POWER on the TV or on the remote control unit to turn the power o The POWER indicator (Green): The TV is on. o The Initial Installation starts when the TV powers on for the first time. If the TV has been turned on before, the Initial Installation will not be invoked.
Page 13 Direct Button Operation You can change the volume by pressing VOL +/- tile TV or on the remote control unit. o To increase the volume, press VOL +. o To decrease the vokJme, press VOL -. I<I_ _2_1 Audio status o When "Output Select"...
Page 14: Av Mode
Direct Button Operation AV MODE gives you several viewing options to choose [] MTS/SAP stereo mode from to best match the surrounding environment of the The TV has a feature that allows reception of sound TV, which can vary due to factors like room brightness, other than the main audio for the program.
Page 15 Direct Button Operation 1 Press CC. o This will present the Closed Caption intormation display. To view external source images, select the input source by 2 Press CC while the Closed Caption information pressing INPUT on the remote control unit or on the TV. still on the screen.
Page 16 Direct Button Operation select screen size. PressVIEW MODE. o The View Mode menu displays. o The menu lists the View Mode options sebctable for the type of video signal currently being received. Press VIEW MODE or _./Y while the View Mode menu is displayed to select a desired item on the menu.
Page 17 On-Screen Display Menu ' h, Example Example Pi ..option Audio Only ® ® ® Item displayed in yellow o This indicates the Rein currently selected. o Press ENTER to go to the adjustment screen for this item. Item displayed in white T_he bar above...
Page 18 On-Screen Display Menu For a better white balance, use color temperature Adjusts the picture to your preference with the correction. following picture settings. High: White with bluish tone _i_d it_:_:::::: Middle: Mid-High: Backlight The screen dims The screen Mid-Low: brightens Low: White with reddish tone Contrast...
Page 19 On-Screen Display Menu • • When set to "Enable", the power will automatically shut You can adjust the sound quality to your preference down if there is no signal for 15 minutes. with the following settings. o When it is 5 minutes before the power shuts down, the Treble For weaker treble For stronger treble...
Page 20 On-Screen Display Menu If Initial Installation does not memorize all the channels For adjusting a picture's horizontal and vertical in your region, follow the instructions below to manually position. memorize the channels. H-Poe.: Centers the image by moving it to the left or Air/Cable: Make sure what kind of connection is made right.
Page 21 On-Screen Display Menu iii_ijii_i_!!_i_ii_i_i_iiii_i ¸_!_!_iiiiiiiiiiiii_i_!i!#!i_i_ii_ii_ii_ii_ii_ii_ii_ii_i_!i!!_!!_!!_!!_!!_!!_!!_!!_!!_!!_!!_!!_!!_ Ordinarily you can easily adjust tile picture as You can output digital audio to an AV amplifier necessary to change image position using "Auto similar device whose DIGITAL AUDIO INPUT terminal Sync.". In some cases, however, manual adjustment...
Page 22 On-Screen Display Menu V-CHIP is an electronic filtering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child Allows you to use a secret number to protect certain...
Page 23 On-Screen Display Menu [] TV Parental Guidelines Canadian Rating Systems (Canadian English ratings and Canadian French ratings) Example o The TV rating systems in Canada are based on the Canadian Radio Tebvision and Tebcommanbations Commission (CRTC) policy on violence in tebvision programming.
Page 24 On-Screen Display Menu [] Canadian French Ratings • • • Example When listening to music from a music program, can turn the screen off and enjoy audio only. On: Audio is output without screen image. Off: Both screen images and audio are output. o The screen image will return to normal when a button (except those tot audio adjustment, such as VOL, MUTE, AUDIO) Press A/Y...
Page 25 If you have any questions, please call 1-800-BE-SHARP (800-237-4277). o This list is not displayed for analog broadcasts or external input audio/video. o This information is not included in CC1, CC2, Tt (TEXTt), • Do remove...
Page 26 On-Screen Display Menu 3 Press A/Y to select "Software Update", and then 7 Press ENTER to start updating. press ENTER. o The screen becomes dark tot a while until the update • If you have already set the Secret No., go to step 4. screen can be displayed.
Page 27 Appendix Problem Possible Solution o No power o Chock if you pressed POWER on the remote control unit. _ Page 12 If the indicator on the TV does not light up, press POWER on the TV. o Is the AC cord disconnected? _ Page 8 o Has the power been turned on? .,YPage 12 o Unit cannot be operated, o External influences such as lightning, static electricity, may cause improper...
Page 28 Appendix Problem Possible Solution o No picture Is connection to other components correct? _ Page 11 Is correct input signal source sebcted after connection? _ Page 24 Is the correct input sebcted? ,_ Page 15 Is "On" sebcted in "Audio Only"? _ Page 24 If the PC image is not displayed, check the fobwing: When connecting a hptop PC to the TV, check that disphy output mode ot the PC is set to external monitor.
Page 29 ,2 The dimensional drawings are shown on the Spanish operation manual. o As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes tor product improvement without prior notice. The pertormance specification figures indicated are nominal vahJes ol production units.
Page 30 Appendix It is necessary to set the PC correctly to display XGA and WXGA signal. Resolution VESA Standard Horizontal Frequency Vertical Frequency 720 x 400 31.5 kHz 70 Hz 31.5 kHz 60 Hz 640 x 480 37.9 kHz 72 Hz 37.5 kHz 75 Hz 35.1 kHz...
Page 31 Calling for Service For location of the nearest Sharp Authorized Sewice, or to obtaffl product literature, accessories, supplies, customer assistance, please call 1-800-BE-SHARP. LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants the first consumer purchaser that this Sharp brand Uqu_d Crystal Display...
Page 32 Dealer. in home warranty service may be provided at Sharp's discretion on any Sharp television with the screen size of 27" or larger and on any Sharp Over-the-Range Microwave Oven. This warranty constitutes the entire express warranty granted by Sharp and no other dealer, service...

This manual is also suitable for:

Lc40d68un

Sharp AQUOS LC-40D68UT Operation Manual

Quick Links

Related Manuals for Sharp AQUOS LC-40D68UT

Summary of Contents for Sharp AQUOS LC-40D68UT

Page 14: Av Mode

This manual is also suitable for:

Table of Contents