Sharp AQUOS LC-80LE632U Operation Manual page 64

Usingthe
Internet
AQUOS
NET APPS
This function can be used to display up-to-date
information on the original home page and allow you to
receive support service over the network.
| If you cannot connect to the Internet
Perform the procedures below to check your TV's
network settings.
1 Press EXIT to exit from the connected TV feature.
2 Press MENU to display the MENU screen, and then
press 4/_ to select "Initial Setup".
3 Press A/V to select "lntemet Setup", and then
press ENTER.
4 Press A/T to select "Network Setup", and then
press ENTER.
5 Press A/T to select "IP Setup", and then press
ENTER.
o Check that numbers are displayedfor each setting.
o Ifthere are any settings without numbers, specify the
numbers by following the on-screen instructions.
o For informationon how to enter text, see page 64.
Example
1 Press AQUOS NET once or twice.
o You can also displaythe original home page by
pressing FAYAPP on the remote control unit. See
page 35 for details on the FAVAPP key Assign
function.
o Eachtime you press AQUOS NET, the screen image
toggles as shown below:
TV+Web,_, Web,_, TV
t !
o When you are not connected to the Intemet, a network
function explanation screen is displayed.
The servicesdisplayed vary depending on
circumstances.
2 Press A/T/_U_ to select a title, and then press
ENTER.
• The servicedetails vary depending on circumstances.
3 Press EXIT to exit from the connected TV feature.
Web page appearances may differ depending on the type
of screen (TV+Web or Web).
o When displaying TV+Web with a channel in which the
V-Chip is enabled, the cursor keys on the remote control
unit do not function.
6 Press MENU to exit.
1 Repeat steps 1 to 4 in IP Setup.
2 Press A/T to select "Country", and then press
ENTER.
3 Press A/V to select "US", "Canada", "Mexico" or
"Others", and then press ENTER.
• Ifyou select "Others", you need to set the desiredarea.
4 Press MENU to exit.
1 Repeat steps 1 to 4 in IP Setup.
2 Press A/T to select "Zip Code", and then press
ENTER. After "Change" is highlighted, press
ENTER again.
3 Enter your zip code.
o Use0-9 on the remote control unit, or use the software
keyboard.
4 After "Complete" is highlighted, press ENTER.
5 Press MENU to exit.
1 Press APPS to display the application window.
2 Press 4/_- to select "AQUOS ADVANTAGE LIVE",
and then press ENTER.
You can also displaythe AQUOSADVANTAGELIVE
screen by pressingFAV APP on the remote control
unit. See page 35 for details on the FAVAPP Key
Assign function.
3 Press A/T/4/_- to select the desired service.
4 Press EXIT to exit from the connected TV feature.
o The display may change as a result of a software update.
Q- 63