Antenna Setup - Digital; Basic Adjustment Settings - Sharp Aquos LC-32GP3U-B Operation Manual

Hide thumbs Also See for Aquos LC-32GP3U-B:
Table of Contents

Advertisement

Basic adjustment
settings
Channel memory setting
VOL
CH
FREEZE
MENU
0
@
Press MENU to display the MENU screen, and
then press 4/1_ to select "Setup".
Press A/V
to select "CH Setup",
and then
press ENTER.
• If you already set the Secret No., input the 4-digit
secret number here. See page 43 for setting a
secret number.
Press A/V
to select "CH Memory", and then
press ENTER.
Press A/Y
to select ANALOG (Air), ANALOG
(Cable), DIGITAL (Air) or DIGITAL (Cable), and
then press ENTER.
In order to receive digital air broadcasts, you need
a digital broadcast antenna. You can confirm the
antenna configuration through the "Antenna Setup -
DIGITAL" screen.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
Signal Strength
Press MENU to display the MENU screen, and
then press 4/1_ to select "Setup".
Press A/V
to select "Antenna Setup -
DIGITAL", and then press ENTER.
Press A/V
to select
"Signal Strength".
• The signal strength of DIGITAL channel is
displayed. The signal information is based on the
current channel.
Signal Strength
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_8
When viewing ANALOG broadcasts:
(_ Press 41/1_ to select the channel to skip,
and then press _' to move down.
(9 Press 4/1_ to select "On", and then press
ENTER.
When viewing DIGITAL broadcasts:
(j_ Press A/T
to select the channel to skip,
and then press 4/1_ to select "On".
Press MENU to exit.
Channel Strength
The channel signal strength can also be checked
separately.
Repeat steps 1 and 2 in Signal Strength in
Antenna
Setup - DIGITAL.
• On: Skips channels.(Channelselectiondisabled using CH
A/V,)
o off: Does not skip channels, (Channelselection enabled
using OH A/V.)
Press MENU to exit.
• Make sure what kind of connection is made with your TV.
Press A/V
to select "Channel Strength", and
then press ENTER.
Input the 2-digit channel number to check the
signal strength of the selected channel.
• Make sure the signal is strong enough for each
channel.
Channel Strength
Press MENU to exit.
• This function is available for DIGITAL (Air) only.
(D-
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aquos lc-32gp3u-wAquos lc-32gp3u-r

Table of Contents