Table of Contents
Advertisement
Connections to other equipment
(continued)
To connect
an audio system
This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the
TV's remote control.
To control the audio, turn on the unit and the stereo amplifier, and turn off the unit's built-in speakers (see
"Turning off the built-in speakers"
on page 24).
Left side of the unit
Amplifier!
To Audio (L) Input _To
Audio (R) Input
Audio cord (not supplied)
NOTE:
To hear sound when using an
external audio amplifier,
the volume
of both the unit and the amplifier
must be set above 0 (zero).
For example,
if the volume of the
unit is set to 0, you will not be
able to hear any sound, even if
the volume of the amplifier
is at its
highest
level.
To connect
the TV/DVD
to a camcorder,
or a TV Game
To playback
from a camcorder,
connect the camcorder
to the unit as shown.
This unit can also be used as a display
device for many video games.
However,
due to the wide variety of
signals generated
by these devices and subsequent
hook-up
variations
required,
they have not all been
included
in the suggested
connection
diagrams.
You'll need to consult each component's
Owner's
Manual
for
additional
information.
Left side of the unit
@
To AV1 or AV2 VIDEO/AUDIO
IN
_or_
AudioNideo
cord (not supplied)
To connect
the TV/DVD
to a PC (Personal
Computer)
Before you connect
this TV/DVD to your PC, change
the adjustment
of your PC's Resolution
and Refresh rate
(60 Hz).
Connect
one end of a (male to male) VGA cable to the video card of the computer
and the other end to the VGA
connector
PC MONITOR
on the back of the TV/DVD.
Attach the connectors
firmly with the screws on the plug. In
case of a Multimedia
computer,
connect the audio cord to the audio output of your Multimedia
computer
and to
the AUDIO connector
of the PC/HDMI-1
AUDIO IN jacks of the TV/DVD.
Press INPUT SELECT
on the remote
control to select PC mode.
Switch on the computer.
The TV/DVD can operate
as the computer
monitor.
Left side of the unit
To PC IN
{
m4>_
@
PC/HDMI-1
@@@
AUDIO IN
@@@
jacks
(3@@
pc]
111
Audio cord (not supplied)
Monitor
Display
modes
MODE
Resolution
Refresh rate
VGA
640x480
60Hz
VGA
720x400
70Hz
SVGA
800x600
60Hz
XGA
1024x768
60Hz
WXGA
1280x768
60Hz
WXGA
1280x720
60Hz
WXGA
1360x768
60Hz
To return to normal mode
Press INPUT SELECT again.
NOTE:
• The on-screen
displays
will have a different
appearance
in PC mode than in TV mode.
• If there is no video signal from the PC when the unit is in PC mode, "No Signal" will appear on the TV-screen.
Advertisement
Table of Contents
