Sansui HDLCD2600 Owner's Manual page 14

Connections to other equipment
To connect the LeD TV to a DTV receiver/set=top box
If you connect a DTV receiver/set-top box, connect your LCD TV to a DTV receiver/set-top box using a compo-
nent video cord.
Left side of the LeD TV
To AUDIO IN 2
_(P _
'L----cO
o To COMPONENT IN
To Audio OUT
Audio cord (not supplied) I
Video cord (not supplied) _ @
PR
To Component OUT
TO connect the LeD TV to a HDMI or a DVl device
The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital
video from a DVI device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only the video signal. Separate
analog audio cords are required.
Left side of the LeD TV
---..- Cg::_-- |
,------- _ble (type A connector) 1
I
(not supplied) To HDMI out
or
HDMI device
or
NOTES:
®
HDMI - to - DVI adapter cable
(HDMI t_) _
(not supplied)
To DVl output
Audio cord (not supplied)
DVI device
If you connect an external component (cable box, satellite receiver, etc.) to this LCD TV using a DVI to HDMI
cable, the image will not display if the output resolution of the component is set to 480i. To receive the picture
you must change the output resolution on the external component.
Should you require further instruction, please contact the manufacturer of the external component.
You must choose an appropriate setting for each connection (see "Selecting the HDMI audio input source" on
page 37).
14