Samsung SMARTCAMERA WB152F User Manual page 9

Basictrosbleshoeting
Learn to solve common problems by setting shooting options,
Tile subjec_ s eyes
#:@pear red
Photos are bhrred
Red eye occurs when the subject's eyes retlect light from the camera flash.
• Set the flash option to _ Red-eye or ___ Red-eye Fix. (p, 57)
• If the photo has already been captured, select ,_ Red-eye Fix in the edit menu, (p, 90)
If dust particles are present in the air, you may capture them in photos when you use the flash,
• Turn off the flash or avoid capturing photos in a dusty place,
• Set ISO sensitivity options. (p. 59)
Blurring can occur if you capture photos in low light conditions or hold the camera incorrectly,
Use the OIS function or half press [Shutter] to ensure the subject is focused, (p, 32)
Photos are blurred
when shoo@/g at
nigh_
Subiec_e come ou_
too dark because of
backNghting
As the camera tries to let in more light, the shutter speed slows. This can make it difficultto hold the
camera steady long enough to capture a clear photo and may result in camera shake,
• Select *) Night in SCN mode. (p. 37)
• Turn on the flash. (p. 57)
• Set ISO sensitivity options, (p, 59)
• Use a tripod to prevent your camera from shaking,
When the light source is behind the subject or when there is a high contrast between light and dark
areas, the subject may appear too dark,
• Avoid shooting toward the sun.
• Select _:_ Backlight in SCN mode. (p, 37)
• Set the flash option to _ Fill in. (p, 57)
• Adjust the exposure. (p, 69)
• Set the Auto Contrast Balance (ACB) option, (p. 70)
• Set the metering option to [] Spot if a subject is in the center d the frame, (p, 70)