Smart Touch Control; Inserting The Batteries; Connecting To The Tv - Samsung UN32F5500 E-Manual

Smart Touch Control
Smart Touch Control is available only with PDP 5500 series and LED 6400 series or higher.
The Smart Touch Control makes it easier and more convenient to use the TV. For example, you can
use the remote control's built-in touchpad to move the focus and make selections as you would on a
computer using a mouse. In addition, you can use the virtual remote panel displayed on the screen to
change channels, play media files, and access favorites.
[nserdng the Batteries (AAA X 2}
o
Gently pull on the battery cover's notch with a fingernail and then remove the cover completely
once it comes loose.
Insert 2 AAA batteries, making sure to align the positive and negative ends correctly.
Align the battery cover with the back of the remote control and press down along the edges until
it is cleanly attached to the remote control.
Connecting to the TV
In order to operate the TV using a Smart Touch Control, you must first pair it to the TV via Bluetooth.
To turn on the TV, point the Smart Touch Control at the remote control receiver of the TV and
press the TV button. The remote control receiver's location may vary depending on the model.
2. A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then
attempt to connect to the Smart Touch Control automatically.
i_ (_, _i_ii_ _ ,8i_,, @_@ 8_i,i_s ,@_@_@_}!_is,i_jiiiii!i!!i!i_ili_i_!i_!i_!_,_s _
<Attempting to connect and completion icons>