Auto Wall-Mou Atadjustment (Sold Separately) - Samsung LN46A500T1FXZA User Manual

Auto Wall-Mount Adjustment (Sold separately)
Once the auto watt mount is installed, your TV's position can be easily adjusted.
Auto Wall-Mount
"IV Rear Panel
Entering the menu
1. Press the &, T, • or I_ button on your remote control.
The Walt Mount Adjustment screen is displayed.
If the Wall Mount Adjustment screen is not displayed when clicking on
a direction button while watching your TV, use the menu to display that
screen.
• Press the MENU button to display the menu. Press the • or • button to select
"Setup", then press the ENTER (_ button.
• Press the • or • button to select "External Settings", then press the ENTER [3_
button.
• Press the • or • button to select "Walt-Mount Adjustment", then press the
ENTER _ button.
Remembering the Position
2, Adjust to the desired position using the •,•, <,1_ buttons.
If you press an arrow button when no OSD is displayed on the TV screen,
the Adjustment screen appears.
Press the INFO button to reset. Press the • or I_ button to select "Yes",
then press the ENTER _ button. The position is initialized to the default
setting.
3, Press the Blue button.
Press the • and • buttons to select a save mode from either Position 1,
Position 2 or Position 3 in order to save the current position.
To not save the current position, press the RETURN button.
When selecting a save mode, you cannot use the Color buttons.
4, Press the ENTER _ button to save.
When Position1 is selected, the message "Current position saved as
Position1" is displayed.
5, Pressthe ENTER _ button.
The saved Position appears on the left side of the OSD.
Moving to the remembered position
1, Complete Step 1 of"Entering the menu".
2, Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to
the saved position.
You can move the wall mount to one of the 3 pre-set positions by pressing the Red (Position 1), Green (Position 2)
or Yellow (Position 3) buttons.
If you adjust the position after moving to a pre-set position, the position display wilt disappear.
For installation, refer to the Installation Manual provided with the wall mount.
For product installation and the installation and moving of the walt mount, make sure to consult a specialized
installation company.
This installation manual is to be used when attaching the watt mount to a wall. When attaching to other building
materials, please contact your nearest dealer.
The auto watt mount will not work when Anynet + is operating.
LN40A500T1F and LN46A500T1F models are not compatible with the older walt mount model (WMN5090A).