Viewing Closed Captions - Samsung LN46A500T1FXZA User Manual

Viewing Closed Captions (On-Screen Text Messages) -Analog
The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external
device to TV. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.)
t, Press the MENU button to display the menu.
Press the • or • button to select "Setup", then press the ENTER _ button.
2. Press the • or • button to select "Caption", then press the ENTER
button.
3, Press the ENTER _ button to select "Caption". Press the • or • button to
select "On", then press the ENTER C:_ button.
4, Press the • or • button to select "Caption Mode", then press the ENTER
button. Press the • or • button to select submenu (Default, CC1~CC4 or
Textl~Text4) you want, the press the ENTER _ button.
Press the EXIT button to exit.
• The default is "CC1 "
• CCI: The Primary Synchronous Caption Service. These are captions
in the primary language that must be in sync with the sound, preferably
matched to a specific frame.
• CC2: The Special Non-Synchronous Use Captions. This channel
carries data that is intended to augment information carried in the
program.
• CC3: Secondary Synchronous Caption Service. Alternate program-
related caption data, typically second language captions.
• CC4: Special Non-Synchronous Use Captions. Similar to CC2
• Text1: First Text Service. This may be various non-program related
data.
• Text2: Second Text Service. Additional data. usually not program
related.
• Text3/Text4: Third and Fourth Text Services. These data channels
should be used only if Text1 and Text2 are not sufficient.
;'-- The Caption feature doesn't work in Component, HDMI or PC modes.
;'-- The availability of captions depends on the program being broadcast.
[_ Press the CC button on the remote control to turn the Caption "On" or "Off'.
TOOLS _
RETURN