Download Print this page
Samsung PN51E8000 E-Manual
Samsung PN51E8000 E-Manual

Samsung PN51E8000 E-Manual

Hide thumbs Also See for PN51E8000:

Advertisement

Quick Links

E MANUAL
SUPPORT
Thank you for purchasin9 this Samsuno oroquc_.
To recewe more complete service, please register
your product at
www.samsung.com/register
Vlodel
Serial No.

Advertisement

loading

Summary of Contents for Samsung PN51E8000

  • Page 1 E MANUAL SUPPORT Thank you for purchasin9 this Samsuno oroquc_. To recewe more complete service, please register your product at www.samsung.com/register Vlodel Serial No.
  • Page 2 Connecting to the Network o],..,,._ ..=O l There are three ways to attach your TV to your LAN using cable: want illustration. user's manual. connection illustrated user = your manual. - You can attach TV to your your LAN by connecting the LAN port on the back of your TV to an external...
  • Page 3 modem using a LAN cable. - You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an IP Sharer which is connected to an external modem. Use LAN cable for the connection.
  • Page 4 of your TV directly to a network wall outlet using a LAN cable. Note that the wall outlet is attached to a modem or router elsewhere in your house. requires Dynamic If your should use an ADSL IP address, modem that supports Host Dynamic...
  • Page 5 address, subnet mask, values ewax needs access the Inte_net ente_ them manually° ho_e networks Dynamic IR address° Static netwo_ks require address° requires Static IR address, IR address, and DNS values manually when...
  • Page 6 connection° get the address, gatewax values, contact Internet Service Provider (ISP/o have Windows purer, you also get these values through co_putero ADSL modems that DHCP IP address° ADSL requires modems that DHCP also...
  • Page 7 Static add_esseso If you want illustration, use_°s manual° connection illustrated in your use_ ° manual° You can connect TV to your your through a standard wireless router or modem. This TV supports the IEEE 802.11a/b/g and n communication protocols.
  • Page 8 Samsung recommends using IEEE 802.11n. When you play video over a network connection, the video may not play smoothly. connected sharer youtey oy If the wi ess IP sharer suppor DHCP or ' youy static IP address to connect wireless...
  • Page 9 channel sha_e_ that currently being channel fo_ _ the used° being wireless sha_e_ by anothe_ device nea_bx this will result munication failure° only the following wireless security ©_otocols::::: Authentication Mode :WEP, WPAPSK, WPA2PSK...
  • Page 10 - Encryption Type :WEP, TKIP, AES High- (G_eenfield/802olln throughput mode Enc_yption TIIII_ IP o_ TIIK IP A ES your AP o_' wi route_, Sa_sung TVs will not support connection compliance with Wi-Fi certification specifications° If your wireless route_ suppo_ Setup...
  • Page 11 connect netwo_k /Push Configuration) Identification Numbe_}o WPS will automatically configure SSID and mode° If your route_; modem, device connect the TVo Connection Methods::::: the wi ess netwo_k connection...
  • Page 12 - Auto Setup the Auto {Using Network Search function) - Manual Setup...
  • Page 13 Setting up the Wired Network Set the wired or wireless network connection to use various Internet servi ces such as i_:, _, i',:!:, _, Pi_y and perform software upgrades. Wi_ed You can configure your TV's wired network connection automatically when connecting your TV to a network that...
  • Page 14 supports DHCP. connecting pop-up appears dir_ectly set wired network° connecton automatca X foo these 1. Go to the screen. 2. Select S_s,_t. The network test screen appears and verifies the network...
  • Page 15 connection. 3. When the connection has been ve rif ied, t he i i 'i_ i }(!!!_ ,l¸¸¸¸¸' i'l_ _ !!!_{ .._i_i_i ii:: iI_ 8V_!!!_ 8i_ I 3_ y ii_i3' _0 !_} i i_!!!_ _Yi 8 i li"ii _ ii _i::!!!!!iii_ _! '¸'¸¸_' li"ii (!!}!}:i_ message...
  • Page 16 to set the connection if you manuallx go to section, °'Manual Setup° °'' i.,_i Q iWlll?,= You can configure your TV's wired network connection manually when that connecting your TV to a network requires a Static IP address. get the address, contact gatewax...
  • Page 17 TV°s i_ed connecton manualx tBese 1. Go to the screen. 2. Select S_s_t. The network connection screen appears and the verification process starts. 3. Select The verification process stops. Select Seii_,gs on network connection screen. The _P Setti_,_s...
  • Page 18 screen appears. 4. Select the and then set the _P to _:_,_ 5. Go to the _P __,:_ss entry field, and then select the _P__,:_ss using remote. 6. Enter the first portion of the _P (for example, 105) into the first entry field using your remote.
  • Page 19 When done, go to the next field. 8. Repeat the entry process for each field in the :P Add,_ess. istake when make entering number, re-enter number 9. When done, go to the !::::; fields. 10. Repeat the same entry process...
  • Page 20 11.When done, select _iiI:_;;. The network test screen appears and the verification process starts. When the connection has been verified, _ ..... message appears...
  • Page 21 You can check the current network Internet status. Wt__ e n the connect on fa edooo • No network cable found, Check that your network cable is plugged in. If it is connected, make sure that the router is turned on; if it is on, try turning if off and on again.
  • Page 22 manually by selecting - Ensure DHCP server is enabled re-plug-in router and unplug Internet Service router. - Contact your Provider for more information. Unable to connect to the network, ® Try the following: check if your address is set correctly _,,:_.
  • Page 23 cannot connect to the Internet. Check the DNS settings in _P or contact your Internet Service Provider to access the Internet. • Network setup complete, but cannot connect to the Internet. Contact your Internet Service Provider to access the Internet.
  • Page 24 Setting up the Wireless Network Set the wired or wireless network connection to use various Internet servi ces such as i_:, _, i',:!:, _, Pi_y and perform software upgrades. Wii"e ess Setup Most wireless networks have an optional security system that requires devices that access the network...
  • Page 25 transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set wireless wireless security...
  • Page 26 you will have to enter the Pass Phrase during the automatic or manual setup process. _"e ess connecton automatca X folo these 1. Go to the screen. 2. Select S_s_t. The network function searches for available wireless networks. When done, it displays...
  • Page 27 list of the available networks. 3. in the list of networks, sebct network you want to connect, then select Ne:,::t. If the wi ess router set to Hidden (Invisible:.,, have Netv o_/_<and /SS D) Security IIIl_oy to establish connection° 4. If the Enter security key screen...
  • Page 28 appears, step select a wireless router that does have wireless security, step 5. To wireless security router, enter Security (Security PIN). enter the Security (Security PIN/using keyboard screen° remote o Security usin9 should to find...
  • Page 29 Pass on one of the used to scFeens up your router or modem° The network 6. When done, select connection screen appears and the verification process starts. 7. When the connection has been ve rif ied, t he (/}_...
  • Page 30 message appears. If the does accept Security Key {Security PIN).. enter the settings manually° set up the connection If you want manuallx Then, _'Manual Setup_o Manual Wi_eess You can configure your TV's wireless...
  • Page 31 network connection manually when connecting your TV to a network that requires a Static IP address or if the automatic connection process has failed. address, values, contact gatewax Intern Provider (ISP TV°s i-e ess connecton manualx these...
  • Page 32 1. Go to the screen. 2. Select S_,_t. The network function searches for available wireless networks. When done, it displays list of the available networks. 3. in the list of networks, select a network you want to connect, then select Newest. If the wi ess router set to...
  • Page 33 /SS D/ Security IIIl_oy to es blish connection° 4. if the Enter security key screen appears, go to step 5. if you select a wireless router that does not have wireless security, go to step 7. 5. To set wireless security for the router, enter the Security Key (Security...
  • Page 34 can ente_ the /Security PIN} using keyboard Security IIIl_oy using your _' should to find on one of the used to scFeens up your router or modem° The network 6. When done, select and the connection screen appears verification process starts.
  • Page 35 7. Select S!:o_:_. verification process stops. Select network connection screen. Sei;f!_,,gs screen appears. 8 Select i:D: Set:_/:,:_;o, and then set the :P entry field, 9. Go to the using and then select the remote. 10. Enter the first portion of the (for example, 105) into the...
  • Page 36 first entry field using your remote. the next field. go to When done, 11. Enter the next portion of the :P When done, go to the next field. 12. Repeat the entry process for each field in the :P Add,:ess. istake when make entering...
  • Page 37 fields. 14. Repeat the same entry process for 15.When done, select ii _ ii. The network connection screen appears and the verification process starts. When the connection has been verified,...
  • Page 38 message appears. WPS(PBC} o_k Setup if your router has a WPS(PBC) button, you can configure your TV's wireless network connection using the WPS(PBC) button more easily. TV°s i_'eess folo connect on using WPS(PBC 1. Go to !/"_ !_ sc reen.
  • Page 39 2. Select S_,_t. The network function searches for available wireless networks. When done, it displays list of the available networks. 3. Select the i!:i : 4. Press the WPS(PBC) button on your router within 2 minutes. Your TV automatically acquires all the network setting values it needs and connects...
  • Page 40 Access osyk Setup & Access function lets you easily connect your Samsung TV to your Samsung wireless router (sold separately) by using a USB memory stick to transfer the setup information from the router to the TV. If your...
  • Page 41 & Access on ss_sUngoCO_o TV°s i_eess connect on usng 1. Turn on the Samsung wirebss router and your TV. 2. Insert a USB memory stick into the USB port in your Samsung wireless...
  • Page 42 (Blinking -_ on). 3. Take the USB memory stick out of the router, and then insert it into a USB port on your Samsung TV. The memory stick downloads connection information. 4. Wait until the connection automatically established.
  • Page 43 screen appea_s on the of the failU_eo screen notifying If you to try using Acc_ ss again, disconnect the USB stick, reset the AP, and again Step So also one of the othe_ connection methods° 5. The network connection screen appears, and the network setup...
  • Page 44 6. Place the wireless router in a desired location. If the wi ess router's settings change or _you install new wireless router, procedure again, beginning fro_ Step 1o You can check the current network...
  • Page 45 Internet status. W2"_ e n the _'eess connect fa edooo • Wireless network connection failed, No wireless router selected. Go to S_ tti_,gs to select your router. Unable to connect to wireless router. Try the following: check that the router is turned on, and if it is try turning off and on again.
  • Page 46 IP auto setting failed, ® Try the following to set your IP address automatically. Or set your IP address manually by selecting _P S_tt_,_s. - Ensure DHCP server is enabled on router and unplug and re-plug-in router. - Contact your Internet Service Provider for more information.
  • Page 47 Contact your Internet Service Provider for more information. Connected to your local network, but ® cannot connect to the Internet, Check the D N S settin or contact your Internet Service Provider to access the Internet. Network setup complete, but cannot ®...
  • Page 48 Managing the Network Connected Devices Set to connect the TV to wireless mobile devices. Using this function, can connect wireless mobile devices with your TV directly without a router. use this function, your mobile device should...
  • Page 49 1. Go to I _: _! ) _ i screen The TV starts to -_ Wi I....I_:_;_:;_¸i search devices. 2. Turn on the Wi-Fi Direct function your device. Select the desired Wi-Fi device. Press the WPS(PBC) button on your Wi-Fi device within minutes.
  • Page 50 acquires network setting values needs connects your network. - P:N: input the displayed PiN on your device. want to disconnect the device_ If you the connected Wi ....Fi device_ and then So_t AP this function, you can connect Using...
  • Page 51 the TV on your mobile devices if your mobile devices do not support Set the options for connection of Wi-Fi device. ® Turns on or off the When is set to , your mobile devices can find the TV name in Wi-Fi connection list.
  • Page 52 remote control. - If the security key does not meet the is not required digit number, available. Input the generated security key into the device you want to connect. - If network does not operate normally, check the security key again. incorrect security key may cause a...
  • Page 53 Selects whether media functions network. details up options, refer to the "AllShare Settings" in the section. Enter a name for this TV. This name will be shown on network remote controls and devices using A keyboard appears screen...
  • Page 54 your TV manually using your control° Fo__ example, if you want cBange sung eacB cBa_acte_ using your remote° done, Doe°...
  • Page 55 Setting the Time ---_ I iii ¸l'Y'iii@ T se ti_e set will appear w sen INFO Isutton oy select ® Set the clock to use the various timer features of the TV. disconnect If you have the clock again°...
  • Page 56 2. Select _iliii yo u The TV will automatically download the correct time from a digital channel. and then select - Select your Time Zone. - Select (Daylight Savings...
  • Page 57 Time). Select if you want to turn the adjustment on and of f m an ua IIy. Selec t :_/: t o t ur n of f adjustment. function only available when the set to - The screen appears. manua Ily. You can set the current date and time...
  • Page 58 using your remote. Availabb only w is set to //( {},i ® Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes). period of time using remote° c a n cel {_,/_}:: + { ++++_+/+++++...
  • Page 59 so that your TV turns automatically at a time and on a day of your choosing. You can set up three se p a ra t e _ ..c o nf ig ura t io n s. /i_ ) You must set clock before...
  • Page 60 you _ ..mark indicates days Set the time that the TV turns on automatically. : Set t he des ired Io ud ness. To select what will be turned on when the timer setting is activated. You can set the TV to turn on a specific channel or play back contents such as video, photo or audio files located...
  • Page 61 USB device connected before you_ is set to (when the V): Select Ai,_ or Csbi_:. (when the is set to _,): Select the desired channel. (when the is set to L:SB): Select a folder in the USB device containing music or photo files you want played when the TV turns...
  • Page 62 automatically. If there music file on a folder device don_t select ining music file, function cor_rectl% not operate file in If there is only show will USB, slide If a folder is too long, folder cannot selected° Each assigned folder: using more than...
  • Page 63 of the type USB, make folders assigned have na_eSo recommend that you use stick multi w Be n us i n g f u n c t io n m a y n o t wo r built-in USB devices PMPs made MP3 players, manufacturers...
  • Page 64 devices° If you to play a file may take up 40 seconds or ' more play the file after the turned On o • { ii_ i _f ... i¸¸¸iii _ reel..Set { so t hat you r TV t ur ns off automatically at a time and on a day can set up...
  • Page 65 You must set clock before i_,: : Select If you select you can choose the days you want to turn off your TV..mark indicates days you' Set the time that the TV turns off automatically.
  • Page 66 Blocking Programs i++i_++++++++++i!il (!!!!!!_ i+++_ii l++i-_> __> Using this function, you can configure channel related security options. Every time you access the functions, the PiN screen will appear and you must enter that PiN. The PiN screen closes and the menu appears.
  • Page 67 you block programs you've determined are inappropriate for your children based on their ratings. To access the Program Rating Lock feature and make any changes, you must enter a PiN (personal identification number). To watch a blocked program, you must also enter the same PiN.
  • Page 68 oo0_0_0_0,,o R_I::i_,_:You can block TV programs based on their ratings. This function allows you to control what your children can watch. displays a grid with locks. The following categories are on the left side: Young children Children 7 and over iVG: General audience...
  • Page 69 id ance : P a re nt a I Viewers 14 and over _,_:M atu re aud ien ce The following categories are on top: Lock all TV ratings. Fantasy violence Violence - S: Sexual situation Adult Language ©: Sexually Suggestive Dialog block certain...
  • Page 70 lock "click entry field example, click the intersection 8rid £ block all that p_og_ams violent adults° lock unblock ego_x click unblock all the c egodes iCOn° click lock unde_ blocked PIN code when requested°...
  • Page 71 i_:You ca n b lock movies based on their MPAA rating. The Motion Picture Association America (MPAA) has implemented rating system that provides parents guardians with advanced information on which films are appropriate children. displays column with locks and the following ratings categories:...
  • Page 72 :}i: General audience restrictions). Parental guidance suggested. Parents strongly cautioned. Restricted. Children under 17 should be accompanied by an adult. No children under age 17. : Adults only. Not rated. block certain "click entry field lock lock example, click the...
  • Page 73 block all X-rated movies° rating also g_ouped clicking category blocks all pa_ent would block along with example, if you block the :_{i_ catego_x !_( : and ;_/iwill alSOo automatically lock unblock catego_x click iCON° ,:::: : You can...
  • Page 74 block programs based their Anglophone Canadian ratings. ,_ii _:::!_ d is p I ays column with locks following ratings categories: Programming intended for children under age 8. ,:ii : Programming generally considered acceptable for children 8 years and over to watch on their OWn.
  • Page 75 ::}i: General programming, suitable all audiences. Parental Guidance. Programming contains themes or content which may not be suitable for viewers under the age of 14. : Adult programming. block certain lock "click entry field example, click the lock block programs...
  • Page 76 also rating g_ouped clicking category blocks all block pa_ent would along with block the ito For_example, and _:8_ will catego_x blocked° automatically lock unblock categorx click iOONo You can block...
  • Page 77 their French programs based Canadian ratings. displays column with locks and the following ratings categories: G: General _,s_ : Programming generally children considered acceptable on their 8 years and over to watch own. - "_: _ii _ i:_ : Pro g ra m m i n g m ay not b e...
  • Page 78 suitable for children under the age of : Prog ra m m in is not su ita b le for children under the age of 16. - "_ : Pro ra m m in rest ricted to adults. block certain entry field lock click the...
  • Page 79 rating also g_ouped clicking category blocks all the pa[ent would block along with example, if you block catego[% blocked will auto _ at ic a II alSOo lock unblock categorx click iCOn° i {/: Parental...
  • Page 80 restriction information while watching DTV channels. information downloaded fro_ the broadcasting station, deactivated° Parental restriction information auto atically downloaded while channels° It may take several seconds° m e n u !11) =/'/i"i!!11)ii i_i! 111...
  • Page 81 is available fo_ _use afte_ info_mation is downloaded fro_ broadcasting station° depending broadcasting available station, use° Parental restriction levels differ depending the broadcasting station,_ The default depending the downloaded...
  • Page 82 info_m iOno on-screen display to anothe_ language, } {/ in English onlyo Blocking one rating will auto_ ically block othe_ categories that deal with sensitive mate_ialo rating titles (Fo[ _example::::: Humo[ _ o oetC) and ratings...
  • Page 83 °°etc/ may {Fo_ _ example::::: broadcasting diffe_ depending station° + (+++:j+++ ++++ +{/+::+ ++:+ !!++++, T he ,+:_ sc ree n w iII a +++: J++++ ++{/+; p pea r. Choose any 4 digits for your PiN and enter them in fields.
  • Page 84 atcB _"est_"cted move If the TV is tuned to a restricted program or movie, the will block it. The screen will go blank and a pop- Enter the PiN to up message appears. unblock the program or movie using your remote. forget...
  • Page 85 buttons following sequence PIN to =0- mode, which 0_0_0_ .._ o-_-_ _¸ ..l?l¢,J I [,S,,_ {powe_ on).
  • Page 86 Economical Solutions :_::::::::::_ _i IJt:i ! oI'i_ _!ii_::::::_i IJt:i ! _:::::_I'i_ iV!il _ !!!!!!_i _ii IJ ---_ iii!!!!!:!!:!:!!!: i'i_!!!!_ i !_ii_ y _!ii_ _!!!!!!_v i_ i_ii 'i_ _iiii_ ® Lets you adjusts the brightness the TV in order to reduce power co nsu m pt io n.
  • Page 87 ® To enhance power savings, the picture settings will automatically adapt to the light in the room. set to menu, the :{ will automatically: : When the :::{ :::::::;:::::::::_ is set to, you can manually adjust...
  • Page 88 minimum screen brightness. iiii /i W display brightness change /become slightly darker brighter/ depending the light intens control FO0_° _inimum brig hess with i / i/i function° ® To avoid unnecessary energy...
  • Page 89 consumption, you can set how long you want the TV to remain on if it's not receiving a signal. Disabled when an attached saving Ùde° ® The TV will automatically turned off when no user operation is detected 4 hours.
  • Page 90 Picture In Picture (PIP) -_ P:P i'V!il _!!!!!!_ i _ii I, J -__ You can watch a program whose signal has passed through the TV's tuner and video from one external video source simultaneously. For example, if you have a cable box connected to the Cable In jack, you can use PIP to watch...
  • Page 91 player attached HDM! jack. While is on, cannot P_Po • p:p Activate or deactivate the P_P function. ® Select either or ,::: :_:::;i_: as the input source for the sub-picture screen. Select the channel for the sub-picture screen.
  • Page 92 ® Select a size for the sub-picture screen. • Pos;t;o Select a position for the sub-picture screen. In Double ri_} _ode, cannot select Positi_o You can choose to listen to the sound from the main picture or the sub picture.
  • Page 93 while watching function reset to turn your must turn P_P mode° You may that the picture becomes slightly unnatural use the main view ga_e ka_aokeo function°...
  • Page 94 P_P Settings::::: picture external will main screen picture the TV_s tuner will P:P sub- picture - Main picture: Component, HDMI - Sub picture: TV...
  • Page 95 Using the TV with a Keyboard and a Mouse Using this function, you can set up input devices to use with the TV. You can check your device list and adjust the settings in this menu. model Depending may not compatible ®...
  • Page 96 Lets you use a USB or Bluetooth keyboard with your TV. if you want to use a USB keyboard, connect it on the USB port. if you want to use a Bluetooth keyboard, connect it using the Bluetooth function. Available only when keypad appea_s...
  • Page 97 list. you can only use one keyboard keyboard, even if several are connected. You can add the Bluetooth keyboard. ,_ili ii_ _iiilYiiiii !_iiii_I'i_ Sets the default options for the keyboard language and type. : Set a Iangua for your keyboard. : Set what a type a keyboard you're using to enter text...
  • Page 98 sequence to change switching input language. ® Lets you use a USB or Bluetooth mouse with your TV. If you want to use a USB mouse, connect it on the USB port. If you want to use a Bluetooth mouse, connect it using the Bluetooth function.
  • Page 99 a PC. Select which mouse from your mouse list. only mouse, even several connected. Bluetooth mouse. Sets default options mouse buttons. ,: Select main...
  • Page 100 button want click select on screen. i_,:, : Set the size of the on- screen mouse pointer. :i:::::::' _::::::_ _:: i::: _ ::::::: ::::::: Select the speed the mouse pointer. 1. Connect a USB or Bluetooth mouse on your TV. 2.
  • Page 101 Click a menu wish, then menu same a PC.

This manual is also suitable for:

Pn64e8000Pn60e8000Pn60e7000Pn64e7000Pn51e7000