I ENGLISH
IEEE 1394 Data Transfer
•
CPU :faster Intel® Pentium lIF M450Mhz compatible.
•
Operating system :Windows®98SE, ME, XP, Mac OS (9,1~10,2)
•
Main memory : more than 64 MB RAM
•
IEEE1394 add-on card or built in IEEE1394 card
1. Set the power switch to PLAYERmode.
2. Connect the DV cable (not supplied) from the DV IN/OUT port of
the camcorder to the DV IN/OUT port of the other DV device.
• Make sure that DV iN appears on the screen.
3. Press the START/STOPbutton to begin REC PAUSE mode.
• PAUSE is displayed on the OSE_
4. Start playbackon the other DV device while you monitor the picture.
5. Press the START/STOPbutton to start recording.
•
If you want to pause recording momentarily, press the START/STOPbutton again.
6. To stop recording, press the • (STOP) button.
When using this camcorder as a recorder, the picturesthat appear on a monitor may seem uneven,
howeverrecorded pictures will not be affected,
,,&