Changing Channels - Samsung LN46A530 User Manual

8, Press the A or _' button to highlight the time zone for your local area. Press
the ENTER _ button. If you have received a digital signal, the time will be
set automatically. If not, see page 45 to set the clock.
9, The message "Enjoy your watching." is displayed.
When you have finished, press the ENTER _ button.
if you want to reset this feature...
t, Press the MENU button to display the menu.
Press the _, or _" button to select "Setup", then press the ENTER _ button.
2, Press the ENTER _ button again to select "Plug & Play".
For further details on setting up options, refer to the pages 12-13.
The "Plug & Play" feature is only available in the TV mode.
Changing Channels
Using the Channel Buttons
t,
Press the CH v or CH ^ button to change channels.
> When you press the CH v or CH ^ button, the TV changes channels in
sequence.
You will see all the channels that the TV has memorized. (The TV must
have memorized at least three channels). You will not see channels that
were either erased or not memorized. See page 16 to memorize channels.
Using the Number Buttons
t,
Press the number buttons to go directly to a channel. For example, to select
channel 27, press 2, then 7.
For quick channel change, press the number buttons, then press the
ENTER O ,_ button.
Using the [_-] Button
The (_-} button is used to select stations that broadcast a digital signal.
t, For example, for Channel 7-1, press 7, then {-}, then I.
HD indicates the TV is receiving a Digital High Definition signal.
SD indicates the TV is receiving a Standard Definition signal.
For quick channel change, press the number buttons, then press the
ENTER _ button.
Using the PRE-CH Button to select the Previous Channel
t, Press the PRE-CH button. The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one
channel, then use the number button to select the second channel.
Then use the PRE-CH button to quickly alternate between them.
I