RCA Scenium HDLP50W151YX1 User Manual page 59

Hdtv with dlp technology
Table of Contents

Advertisement

Using
Main picture
channel number
Channel control
indicator
PIP channel number
Using the PIP Feature
The PIP t;eature is only available fbr analog (NTSC) channels.
PIP won't work when tuned to a digital (ATSC) channel.
Use
/he channel banner to determine
whether
a channel is digital or analog. A digital (ATSC) channel has a dash and second
number
after it (e.g., 21-1); an analog channel doesn't (e.g., Ch 21). While you may use PIP in difl_emnt ways, this basic PIP
scenario should get you started. When watching an analog channel,
fbllow these steps.
1.
Press/he
PIP button on the remote control. The PIP window appears
on the screen and Channel
Cont_'ol is
automatically
set to the PIP window.
2.
Use the channel up and down or number
buttons to change the PIP channel.
3.
To change the program
in the main picture window,
press CH CTRL. Then use the channel up and down or number
buttons. To go back and tk_rth between
controlling/he
PIP window
and the main picture, press the CH CTRL button.
PIP Problems?
If"you are channel surfing and the PIP disappeai_s, you may have tuned to a digital channel. To view PIP and the main
picture, make sure that both/he
main and PIP channels
are analog inputs, or signals. Continue changing/he
channel
until you find an analog (NTSC format) channel. The PIP window
will reappear.
The message "PIP Not Viewable
or Exceeds Rating" in the
channel banner lets you know that PIP is not available on this
channel and you should tune to another channel.
If you press PIP and the PIP window is gray, you may
have activated the Parental Control f)ature and/he
program exceeds
the rating limits you set. For information
on removing
limits, see the section "Parental Controls."
You cannot view closed captioning
in the PIP window.
PIP channel
skips all digital (ATSC) "IV channels
and tunes
to analog channels.
PIP cannot be displayed from component
(Y•Pb-Pr)
inputs.
A typical use of SWAP is to scan through
channels in the PIP window,
and
when you find a channel you like, press SWAP to display that channel in
the main picture.
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scenium hdlp61w151yx1

Table of Contents